2003 US Army BRADLEY GUNNERY 503p.pdf - Survival Books

FM 3-22.1PRETEST CONDITIONS FOR EACH EXAMINEE1. Ensure all power is off.2. Ensure M240C machine gun bolt is forward.3. Ensure manual safe is set to FIRE position.TEST PLANNING TIMEAdministration 5 minutesTest6 minutesTotal11 minutesINSTRUCTIONS TO EXAMINEEThe evaluator will read the following instructions aloud to the examinee:"Let me have your attention. This task evaluates your ability to load, fire, and applyimmediate action to the M240C machine gun."Do you understand these instructions?"Pause for 5 seconds, then say—"You have 6 minutes to complete the task."Pause again, then say--"Begin."Start timing at once. If the examinee has not completed the task after 6 minutes, then sayloudly enough for him to hear--"Stop."If at any time you think that he is going to damage the equipment or injure himself,then say--"Stop."PERFORMANCE MEASURES1. Completed performance measures within 6 minutes.2. Loaded the M240C coax machine gun.a. Opened forwarder access door (M2 or M3 only).b. Opened coax machine gun access doors.c. Charged coax machine gun.d. Set manual safety on coax to SAFE.e. Opened cover assembly and feed tray.f. Inspected chamber for rounds.g. Placed ammunition in forwarder.h. Closed forwarder access door (M2 or M3 only).i. Forward ammunition to the feed tray.j. Closed feed tray.k. Installed ammunition belt on feed tray.l. Closed cover assembly.m. Closed coax machine gun access doors.3. Fired coax machine gun.A-19