2003 US Army BRADLEY GUNNERY 503p.pdf - Survival Books

FM 3-22.1TASK 10ABORESIGHT TURRET WEAPONS SYSTEMS (M2A3, M3A3)CONDITIONSGiven an operational Bradley with BII and coax installed, operational boresight kit with25-mm gun adapter, and TM 9-2350-294-10-2-1.STANDARDSWithin 25 minutes, the crewmember--1. Boresighted the--• TAS and backup sight to the 25-mm gun.• CIV to the 25-mm gun.• TAS and backup sight to the coax.• TAS to the TOW launcher.2. Aligned the--• TAS TV NFOV to the aided target tracker.• TAS TV WFOV to the aided target tracker.• CIV FLIR to the TV.EVALUATION PROCEDURES1. Administrative Process. At this task, the evaluator logs information about eachcrewmember on a roster. He supplies the crewmember with all required materials andequipment, displaying them IAW this manual. He uses the performance measures torecord the crewmember's performance. Afterward, he tells the crewmember how wellthe crewmember performed on this task and directs him to the next task or to furthertraining. One evaluator can test one--and only one--crewmember at a time.2. Procedures Used When Personnel Receive a NO GO. If a crewmember fails toachieve the standards on the performance measures, he earns a NO GO. When thishappens, the evaluator explains to the crewmember what he did wrong and how tocorrect his mistakes. Then, he retests the crewmember IAW local SOP.PERSONNEL, EQUIPMENT, AND MATERIALS• Qualified 11B, 12B, 13F, 14R, or 19D, sergeant or above.• Operational M2A3 or M3A3 with BII.• TM 9-2350-294-10-2-1.• FM 3-22.1.• Boresight kit.• Boresight panel (1,200 meters distant).• Stopwatch.• Clipboard with pen.• One helper, qualified 11B, 12B, 13F, 14R, or 19D, sergeant or below.PRETEST PREPARATION1. Ensure boresight telescope is operational.2. Ensure engine is off.3. Ensure master power is on.4. Ensure all drive-select levers are in POWER mode.A-41