2003 US Army BRADLEY GUNNERY 503p.pdf - Survival Books

FM 3-22.1TASK 6LOAD, FIRE, AND APPLY IMMEDIATE ACTION ON ANM240C COAX MACHINE GUN(M2, M3, M2A2, M3A2, OR M2A2 ODS OR M3A2 ODS)CONDITIONSGiven a Bradley with BII, an M240C machine gun installed, and 300 rounds of dummy7.62-mm ammunition loaded into the ready box.STANDARDSWithin 6 minutes, the crewmembers--• Loaded the coax machine gun.• Fired the coax machine gun.• Applied immediate action to the coax machinegun.EVALUATION PROCEDURES1. Administrative Process. At this task, the evaluator logs information about eachcrewmember on a roster. He supplies the crewmember with all required materials andequipment, displaying them IAW this manual. He uses the performance measures torecord the crewmember's performance. Afterward, he tells the crewmember how wellthe crewmember performed on this task and directs him to the next task or to furthertraining. One evaluator can test one--and only one--crewmember at a time.2. Procedures Used When Personnel Receive a NO GO. If a crewmember fails toachieve the standards on the performance measures, he earns a NO GO. When thishappens, the evaluator explains to the crewmember what he did wrong and how tocorrect his mistakes. Then, he retests the crewmember IAW local SOP.PERSONNEL, EQUIPMENT, AND MATERIALS• Qualified 11B, 12B, 13F, 14R, or 19D, sergeant or above.• Operational M2, M2A2, or M2A2 ODS or M3, M3A2, or M3A2 ODS with BII.• TM 9-1005-313-10.• TM 9-2350-284-10-2 or TM 9-2350-252-10-2.• FM 3-22.1.• M240C coax machine gun.• 300 rounds of 7.62-mm dummy ammunition.• Stopwatch.• Clipboard with pen.• One helper, qualified 11B, 12B, 13F, 14R, or 19D, sergeant or below.PRETEST PREPARATION1. Clear the weapon.2. Disassemble the weapon to ensure that all parts are present and serviceable.3. Assemble the weapon to ensure that all parts are present and serviceable.4. Ensure rounds do not bind in feed chute.5. Remove rounds from feed chute.A-18