2003 US Army BRADLEY GUNNERY 503p.pdf - Survival Books

FM 3-22.1PRETEST CONDITIONS FOR EACH EXAMINEE1. Turn on master power.2. Turn on turret power and turret drive.3. Select and arm M240C coax.TEST PLANNING TIMEAdministration 5 minutesTest4 minutesTotal9 minutesINSTRUCTIONS TO EXAMINEEThe evaluator will read the following instructions aloud to the examinee:"Let me have your attention. This task evaluates your ability to clear the M240Ccoaxial machine gun and to unload the 7.62-mm ammunition."This test is scored in sequence. Do you understand these instructions?"Pause for 5 seconds, then say—"You have 4 minutes to complete the task."Pause again, then say--"Begin."Start timing at once. If the examinee has not completed the task after 4 minutes, then sayloudly enough for him to hear--"Stop."If at any time you think that he is going to damage the equipment or injure himself,then say--"Stop."PERFORMANCE MEASURES1. Completed performance measures within 4 minutes.2. Cleared the coax machine gun.a. Moved ARM-SAFE-RESET switch to SAFE.b. Turned turret drive switch to OFF.c. Unlatched CTD from its bracket.d. Released handle on right access door to unlatched door.e. Pulled out on left side of CTD to open left access door.f. Pushed in right coax machine gun access door.g. Pulled charger handle back firmly.h. Moved manual safety up to SAFE position.i. Opened cover assembly.j. Removed ammunition belt from feed tray.k. Opened feed tray.l. Checked to see if chamber was cleared of ammunition.m. Closed feed tray.n. Closed cover assembly.A-28