2003 US Army BRADLEY GUNNERY 503p.pdf - Survival Books

FM 3-22.16. Ensure vehicle is parked on level ground.7. Ensure ballistic sight covers are closed.8. Ensure driver and cargo hatches are closed.PRETEST CONDITIONS FOR EACH EXAMINEE1. Ensure ARM-SAFE-RESET switch is set to SAFE.2. Ensure thermal sight is off.3. Ensure magnification is set to low.4. Ensure the range index is on 12.5. Ensure reticle brightness is off.6. Offset day and night 25-mm boresight knobs.7. Offset coax mount azimuth elevation knobs.8. Offset TOW boresight screen.9. Move turret out of target area.10. Ensure travel lock is engaged.11. Ensure turret shield door is closed.TEST PLANNING TIMEAdministrationTestTotalTest for M2A2ODS or M3A2 ODSTotal5 minutes25 minutes30 minutes30 minutes35 minutesINSTRUCTIONS TO EXAMINEEThe evaluator will read the following instructions aloud to the examinee:"Let me have your attention. This task evaluates your ability to boresight the M24225-millimeter automatic gun, the M240C coaxial machine gun, the auxiliary sight,and the TOW launcher."For M2A2 ODS or M3A2 ODS models, you must also boresight the laserrange finder."Do you understand these instructions?"Pause for 5 seconds, then say--"You have 25 minutes (30 minutes for M2A2 ODS or M3A2 ODS models) to completethe task."Pause again, then say--"Begin."Start timing at once. If the examinee has not completed the task after 25 minutes (30minutes for M2A2 ODS, M3A2 ODS), then say loudly enough for him to hear--"Stop."A-38