13.07.2015 Views

2003 US Army BRADLEY GUNNERY 503p.pdf - Survival Books

2003 US Army BRADLEY GUNNERY 503p.pdf - Survival Books

2003 US Army BRADLEY GUNNERY 503p.pdf - Survival Books

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

FM 3-22.1TASK 12LOAD AND UNLOAD THE 25-MM AP READY BOXCONDITIONSGiven a Bradley with the turret positioned at AP load and 45 rounds of 25-mm dummyammunition.STANDARDSThe crewmember--1. Within 6 minutes, loaded 45 rounds in the AP ready box.2. Within 6 minutes, unloaded 45 rounds from the AP ready box and separatedammunition into three 15-round belts.EVALUATION PROCEDURES1. Administrative Process. At this task, the evaluator logs information about eachcrewmember on a roster. He supplies the crewmember with all required materials andequipment, displaying them IAW this manual. He uses the performance measures torecord the crewmember's performance. Afterward, he tells the crewmember how wellthe crewmember performed on this task and directs him to the next task or to furthertraining. One evaluator can test one--and only one--crewmember at a time.2. Procedures Used When Personnel Receive a NO GO. If a crewmember fails toachieve the standards on the performance measures, he earns a NO GO. When thishappens, the evaluator explains to the crewmember what he did wrong and how tocorrect his mistakes. Then, he retests the crewmember IAW local SOP.PERSONNEL, EQUIPMENT, AND MATERIALS• Qualified 11B, 12B, 13F, 14R, or 19D, sergeant or above.• Operational M2, M2A2, M2A2 ODS, M2A3 or M3, M3A2, M3A2 ODS, or M3A3 with BII.• TM 9-2350-284-10-2, TM 9-2350-252-10-2, or TM 9-2350-294-10-2-1.• 45 rounds of 25-mm dummy ammunition.• FM 3-22.1.• Stopwatch.• Clipboard with pen.• One helper, qualified 11B, 12B, 13F, 14R, or 19D, sergeant or below.PRETEST PREPARATION1. Position turret at AP load position with travel lock engaged.2. Place three 15-round belts of 25-mm dummy ammunition on the floor of the hull tothe rear of the turret shield door.3. Inspect AP ready-box door for serviceability; replace all unserviceable ormissing parts.PRETEST CONDITIONS FOR EACH EXAMINEE1. Turret is in AP load position.2. Master power and turret power are both turned off.3. AP ready-can door is secured.4. Ammunition selector lever is in M919 position.A-53

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!