2003 US Army BRADLEY GUNNERY 503p.pdf - Survival Books

FM 3-22.1TASK 8AREMOVE AN M240C COAX MACHINE GUN (M2A2 ODS FBCB2, M3A2 ODSFBCB2, OR M2A3 OR M3A3 ONLY)CONDITIONSGiven a Bradley with BII and a cleared coax.STANDARDSWithin 2 minutes, the crewmember removed the coax machine gun.EVALUATION PROCEDURES1. Administrative Process. At this task, the evaluator logs information about eachcrewmember on a roster. He supplies the crewmember with all required materials andequipment, displaying them IAW this manual. He uses the performance measures torecord the crewmember's performance. Afterward, he tells the crewmember how wellthe crewmember performed on this task and directs him to the next task or to furthertraining. One evaluator can test one--and only one--crewmember at a time.2. Procedures Used When Personnel Receive a NO GO. If a crewmember fails toachieve the standards on the performance measures, he earns a NO GO. When thishappens, the evaluator explains to the crewmember what he did wrong and how tocorrect his mistakes. Then, he retests the crewmember IAW local SOP.PERSONNEL, EQUIPMENT, AND MATERIALS• Qualified 11B, 12B, 13F, 14R, or 19D, sergeant or above.• Operational M2A2 ODS appliqué, M3A2 ODS appliqué, or M2A3 or M3A3 with BII.• TM 9-2350-284-10-2 or TM 9-2350-294-10-2-1.• FM 3-22.1.• Stopwatch.• Clipboard with pen.• One helper, qualified 11B, 12B, 13F, 14R, or 19D, sergeant or below.PRETEST PREPARATION1. Ensure that the master power is off.2. Ensure turret drive system is in manual.3. Ensure turret drive system is off.PRETEST CONDITIONS FOR EACH EXAMINEE1. Ensure that the weapon is cleared.2. Ensure that the turret power is off.3. Ensure that the turret drive is off.TEST PLANNING TIMEAdministration 5 minutesTest2 minutesTotal7 minutesINSTRUCTIONS TO EXAMINEEThe evaluator will read the following instructions aloud to the examinee:A-32