MicroMaster 6SE92 - ECT Sales & Service

More documents

Recommendations

Info

COMBIMASTER & MICROMASTER Integrated8.1 COMBIMASTER Introduction 8/18.1.1 COMBIMASTER Product Overview 8/18.1.2 COMBIMASTER Technical Features 8/28.1.3 COMBIMASTER Options Overview 8/28.1.4 COMBIMASTER International Standards Conformity 8/38.1.5 COMBIMASTER Quotation Sheet 8/48.2 COMBIMASTER Technical Description 8/58.2.1 Power Section 8/58.3 COMBIMASTER De-rating Information 8/68.4 COMBIMASTER Installation 8/78.4.1 Mechanical Installation 8/78.4.2 Electrical Installation 8/148.5 COMBIMASTER Standard Applications 8/208.5.1 COMBIMASTER Fan Application 8/208.5.2 Two-Speed Conveyor Belt 8/208.5.3 PI Application 8/208.5.4 Brewery Bottling Plant 8/218.6 COMBIMASTER User Interfaces 8/228.6.1 Communications, Operator Control and Visualization 8/228.6.2 Built-in Potentiometer and Signal LEDs 8/228.6.3 Serial RS 485 Interface 8/238.6.4 Control Terminal Strips 8/238.6.5 Clear Text Display (Optional) 8/238.6.6 RS232 Interface 8/238.7 COMBIMASTER Selection and Ordering Data 8/248.7.1 COMBIMASTER Motor Data Tables 8/248.7.2 COMBIMASTER Cable and Fuse Selection Tables 8/258.7.3 Order Numbers 8/268.7.4. Option Order Numbers for COMBIMASTER and 8/27MICROMASTER Integrated8.8 COMBIMASTER Options 8/298.8.1 Clear Text Display 8/298.8.2 PROFIBUS CB155 8/298.8.3 Pulse Resistor Braking Unit 8/328.8.4 Electomechanical Brake Control 8/338.8.5 CANbus Module 8/338.9 MICROMASTER Integrated 8/348.9.1 MICROMASTER Integrated Order Numbers 8/34
COMBIMASTER & MICROMASTER Integrated8.1 COMBIMASTER IntroductionCOMBIMASTER combines the inverter and motor as a singlemodule offering particular advantages in terms of ease ofinstallation and commissioning.• No cables are required between inverter and motor.• A very high level of protection is offered (IP55) allowinguse in harsh environments such as those in the HVACand food and drinks industries.• A standard Siemens low voltage AC motor is used andtherefore both 2 and 4 pole variants and a wide range ofstandard flange types are available.• Both constant torque and variable torque control ispossible, limited only by motor thermal performance.• The optional EMC filter, meeting EN55011 Class A orClass B, is integrated within the electronics housing.• COMBIMASTER carries the CE mark for both EMCconformance and conformance to the low voltagedirective.• For simple applications a potentiometer is built-in forsetting the motor speed and no other adjustment isnecessary.• The unit may also be controlled using digital inputs, thestandard RS485 serial interface or the same Clear TextDisplay module as is available for the MICROMASTER.• The motor speed setpoint may be input in the same wayas for the MICROMASTER.• An RS485 serial interface is standard allowing up to 31drives to be networked to a PLC or PC using the USSstandard protocol.• The drive may be enabled via digital inputs or over thestandard RS485 serial interface, or from the built inpotentiometer.• The motor speed setpoint may be selected using a digitalsetpoint, motorised potentiometer, fixed frequency,analogue input or via the serial link.• Mixed mode control is also available allowing drive controland setpoint input to be from different sources.• A DC injection brake is incorporated which also allows DCto be output when the motor is stationary.• The motor may be configured to start automaticallyfollowing a mains break or a fault.• The parameter sets are compatible between the differentproduct types, reducing the learning time.• IP55 Protection means that installation in all usual motorenvironments is possible.• All drives are certified in accordance with VDE, UL andCanadian UL and are manufactured to ISO9001.• All drives conform to the requirements of the EC lowvoltage directive 73/23/EEC, the electromagneticcompatibility directive 89/336/EEC, and carry the CEmark.• A wide range of options is available, i.e. integrated ClassA and Class B filters, built-in braking module (pulseresistor and electromechanical types are available),CB155 PROFIBUS module supporting bus baud rates upto 12MBd, SIMOVIS PC commissioning software and theMICROMASTER Clear Text Display Module OPM2.8.1.1 COMBIMASTER Product OverviewThe COMBIMASTER is intended for use anywhere in theworld and therefore supports a wide range of mains voltages:208 to 240V ± 10% 1/3 Phase380 to 480V ± 10% 3 Phase460 to 500V ± 10% 3 PhaseFor basic applications, the COMBIMASTER can beconsidered as a simple variable speed motor. All that isneeded is to connect the Mains and start the motor at thedesired speed using the built in potentiometer control.For more demanding applications, the COMBIMASTERprovides most of the features of the renownedMICROMASTER range of variable speed drives. TheCOMBIMASTER can be configured using the same ClearText Display as MICROMASTER, and has a compatibleparameter set to minimise learning time.These features include:• Standard PI controller for closed loop process control.Siemens DA 64 – 1998/99 (04/99) 8/1
Page 1 and 2:
MICROMASTERMICROMASTER VectorMIDIMA
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Standard ApplicationsMICROMASTERMIC
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Communications/InterfacesMICROMASTE
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80: Communications/InterfacesMICROMASTE
Page 81 and 82: MICROMASTERMICROMASTER VectorMIDIMA
Page 89 and 90: Inverter Selection and Ordering Dat
Page 129: MICROMASTERMICROMASTER VectorMIDIMA
Page 133 and 134: COMBIMASTER & MICROMASTER Integrate
Page 169 and 170: AppendixMICROMASTERMICROMASTER Vect
show all

MicroMaster 6SE92 - ECT Sales & Service

Create successful ePaper yourself

Delete template?

Save as template?