MicroMaster 6SE92 - ECT Sales & Service

MICROMASTERMICROMASTER VectorMIDIMASTER VectorTechnical Information3.1 Technical Comparison TablePower Range120 W – 3 kW 230 V 1 AC120 W – 4 kW 230 V 3 AC370 W - 7.5 kW 400 V 3 ACVoltage Range 208 – 240 V +/-10%380 – 500 V +/- 10%MICROMASTER 6SE92 MICROMASTER Vector 6SE32 MIDIMASTER Vector 6SE32120 W – 3 kW 230 V 1 AC120 W – 4 kW 230 V 3 AC370 W - 7.5 kW 400 V 3 AC208 – 240 V +/-10%380 – 500 V +/- 10%Input Frequency 47-63 Hz 47-63 Hz 47-63 Hz5.5 kW – 45 kW 230 V 3 AC11 kW – 75 kW 400 V 3 AC2.2 kW – 37 kW 575 V 3 AC208 – 240 V +/-10%380 – 500 V +/- 10%525 – 575 V +/- 15%Power Factor cos Φ ≥ 0.98, Total λ ≥ 0.7 cos Φ ≥ 0.98, Total λ ≥ 0.7 cos Φ ≥ 0.98, Total λ ≥ 0.7Power On/Power Off cycles100,000 (max. guaranteed) 5 secinterval100,000 (max. guaranteed) 5 secinterval100,000 (max. guaranteed) 5 secintervalInrush Current No greater than nominal input current No greater than nominal input current No greater than nominal input currentInverter Efficiency 97% 97% 97%Operating Temperature 0- 50 °C 0- 50 °C 0- 40 °C (50 °C without cover)Storage Temperature -40 to +70°C -40 to +70°C -40 to +70°CRelative Humidity 95% non-condensing 95% non-condensing 95% non-condensingSide by side mounting No clearance required No clearance required No clearance required for IP21 & IP20units.Clearance between IP56 units to begreater than 150mm.Degree of protection IP20 / NEMA 1(FSA units require optional gland plateto meet NEMA1)IP20 / NEMA 1(FSA units require optional gland plateto meet NEMA1)Cooling Method Software-controlled fan cooling Software-controlled fan cooling Fan coolingOutput Frequency 0 – 400 Hz 0 – 650 Hz 0 – 650 HzOutput FrequencyResolution0.01 Hz 0.01 Hz 0.01 HzIP21 / NEMA 1(Optional IP56 / NEMA 4 alsoavailable)Overload Capability 1.5 x rated output current for 60 secs 1.5 x rated output current for 60 secs2 x rated output current for 3 secsControl Method V/f SVC, FCC, V/f SVC, FCC, V/fDigital Inputs 3 (> 7.5V = high, 33V max) 6 (> 7.5V = high, 33V max) 6 (> 7.5V = high, 33V max)Analogue input 10-10 V/PI input10 bit resolution, floating differentialinput0-10 V, 0/4-20 mA-10 V / +10 V bipolar10 bit resolution, floating differentialinputAnalogue input 2 N/A 0-10 V, 0/4-20 mAPID input, 10 bit resolutionAnalogue output 1 N/A 0/4 – 20 mAwith 500Ω max. load10 bit resolution0-10 V, 0/4-20 mA-10 V/ +10 V bipolar10 bit resolution, floating differentialinput0-10 V, 0/4-20 mAPID input, 10 bit resolution0/4 – 20 mA500Ω max. load10 bit resolutionAnalogue output 2 N/A N/A 0/4 – 20 mA500Ω max. loadRelay output 1 30 V DC 1 A, 110 V AC 0.3 A,Normally Open Contacts30 V DC 2 A, 240 V AC 0.8 AChangeover ContactsRelay output 2 N/A 30 V DC 2 A, 240 V AC 0.8 ANormally open contacts30 V DC 2 A, 240 V AC 0.8 AChangeover Contacts30 V DC 2 A, 240 V AC 0.8 ANormally open contactsRS485 Interface D-type D-type / terminal strip D-type / terminal stripBraking Chopper N/A Built-in Optional external moduleCompound Braking Yes Yes YesFast Current Limit Yes Yes YesPID closed loop control Built-in PI Built-in PID Built-in PIDMotor Protection - external PTC input on digital input Dedicated PTC input Dedicated PTC inputMotor Protection - internal I²t I²t (UL approved) I²t (UL approved)Inverter ProtectionLine to Earth short circuit protectionLine to Line short circuit protectionOvertemperature protectionOvervoltage protectionOvercurrent protectionLine to Earth short circuit protectionLine to Line short circuit protectionOvertemperature protectionOvervoltage protectionOvercurrent protectionLine to Earth short circuit protectionLine to Line short circuit protectionOvertemperature protectionOvervoltage protectionOvercurrent protectionSiemens DA 64 – 1998/99 (04/99) 3/1