MicroMaster 6SE92 - ECT Sales & Service

More documents

Recommendations

Info

IntroductionMICROMASTERMICROMASTER VectorMIDIMASTER VectorQuotation Sheet6SE92 MICROMASTER IP20/NEMA10.12 to 3kW 1 phase 230V AC0.12 to 4kW 3 phase 230V AC0.37 to 7.5kW 3 phase 380 to 500V AC6SE32 MICROMASTER Vector IP20/NEMA 10.12 to 3kW 1 phase 230V AC0.12 to 4kW 3 phase 230V AC0.37 to 7.5kW 3 phase 380 to 500V AC6SE32 MIDIMASTER Vector IP21/NEMA1 or IP565.5 to 45kW (7.5 to 60kW Variable Torque) 3 phase 230V AC11 to 75kW (15 to 90kW Variable Torque) 3 phase 380 to 500V AC2.2 to 37kW (4 to 45kW Variable Torque) 3 phase 525 to 575V ACTechnical dataRated connection voltage .................. VRated mains frequency .................. HzRated output current at M = const .................. AOverload capacity (up to 50% for 60sec) .................. AOverload capacity (up to 100% for 3sec) .................. ARated output current at M ∼ n 2 .................. AOverload capacity (up to 10% for 60sec) ..................Rated output at M = const .................. kWRated output at M ∼ n 2 .................. kWOutput frequency from..................to............. HzEMC conformance (EN55011, class A or B) ..................Maximum ambient air temperature (40/50° C) .................. °CDegree of protection (IP20/IP21/IP56) ..................Dimensions (HxWxD) ........x........x........ mmWeight .................. kgMICROMASTER, Order No. ...................................MICROMASTER Vector, Order No ...................................MIDIMASTER Vector, Order No ...................................Voltage source DC link inverters with pulse width modulatedoutputs. Latest generation IGBT technology in the output stagefor high efficiency speed control of three phase AC motors. Unitspre-configured for quick commissioning.Units are UL and CUL listed and designed and built in a factoryaccorded with ISO9001 VDE/EN certification. Full digital controlin microprocessor technology.All units complies with the requirements of the low voltagedirective 73/23 EEC. The units are certified for compliance withCE marks.Power Section3 phase diode bridge input or single phase mains filter withdiode bridge input. High temperature DC link capacitors. Sixpulse self commutating IGBT inverter output stage.Switching and Protective DevicesPre-charging input circuit using relay.Motor ControlOpen loop V/F control with configurable voltage boost (6SE92).Field-oriented Vector control using high accuracy output currentmonitoring with a self adapting motor model (6SE32).Standard Local Operator PanelKeys to switch the motor on and off, change the direction ofrotation, inching, up/down and parameterisation.Four digit 7 segment display for setpoint, actual values,parameter values and fault messages.Optional Intelligent Operator PanelDot-matrix LCD display for multilingual text-driven configuration.Non-volatile storage of up to 10 parameter sets. Parameter setupload and download facilities. Master mode for networking upto 31 drives together. RS232 interface.Direct PC connection possible to read and write parameter setsindependently of the inverter.1/4 Siemens DA 64 – 1998/99 (04/99)
MICROMASTERMICROMASTER VectorMIDIMASTER VectorIntroductionConnector terminal strip for external operationMICROMASTER 6SE923 configurable 24V binary inputs with 18 selectablefunctions. (isolated, contacts, DC30V/2A, AC110V/0.3A)1 configurable relay output with 13 selectable functions.1 analogue input for setpoint input 0/2 -10V.1 power supply 15V/50mA for PID sensor and binaryinputs.1 power supply 10 V/10 mA for setpoint potentiometer.Evaluation of a Motor PTC temperature sensor against abinary output is possible.All terminals fully short-circuit proof.MICROMASTER Vector 6SE32MIDIMASTER Vector 6SE326 configurable 24V binary inputs with 24 selectablefunctions.2 configurable relay outputs (isolated contacts, DC30V/2A, AC 240V/08A) with 13 selectable functions.1 analogue input for setpoint input 0/2 -10V, 0/4 - 20mA,.±10V1 additional analogue input 0/2 - 10V, 0/4 - 20mA, forsetpoint or PID input.1 configurable analogue output with 6 selectablefunctions (0/4 - 20mA (MICROMASTER Vector).2 analogue outputs with 6 selectable functions each(MIDIMASTER Vector).1 Motor PTC temperature sensor connection.1 power supply 15V/50mA for PID sensor and binaryinputs.1 power supply 10 V/10 mA for setpoint potentiometer.All terminals fully short-circuit proof.Standard Automation InterfaceRS485 serial interface with USS protocol for the connection ofup to 31 drives, maximum bus speed 19.2kBd.Optional High Speed Automation InterfacePROFIBUS DP module for the connection of up to 125 drives,maximum bus speed 12MBd.CANbus Module, supporting CAN OPEN protocolStandard FunctionsMICROMASTER 6SE92MICROMASTER Vector 6SE32MIDIMASTER Vector 6SE32Open loop V/F speed control for one or several asynchronous,synchronous or reluctance motors.0 - 650Hz (400Hz for 6SE92) output frequency with 0.01Hzresolution.50% overload capability as a percentage of nominal current for60 seconds.Integrated PID controller, for, e.g. pressure or temperaturecontrol.RS485 serial interface.Sequence control for an external brake.Flying start for controlling a motor that is already spinning.Automatic restart for starting a motor automatically followingmains break or fault.Flexible setpoint input via fixed frequencies, analogue input,motorised potentiometer or serial interface.Flexible control interface allowing control via keypad, digitalinputs or serial interface.Configurable integral DC brake.Compound braking for dynamic stopping without externalcomponents.Additive setpoint input via analogue input and fixedfrequency/digital setpoint input and control from differentsources.Programmable ramp generator (0 - 650 sec) with S-curvecapability.8 configurable fixed frequencies (7 for the 6SE92).4 fadeable frequency ranges for suppressing resonances.Standard integral EMC filter meeting EN55011 class A for singlephase units.Additional Standard Functions 6SE32MICROMASTER Vector 6SE32MIDIMASTER Vector 6SE32Sensorless Vector Control for achieving a high dynamicperformance with standard asynchronous motors.100% overload capability as a percentage of nominal current for3 seconds.Integrated braking chopper with configurable duty cycle(MICROMASTER Vector).Option RangeConsole radio interference filter for 208 - 240V / 380 - 500V, EN55011 class A or B compliant (MICROMASTER andMICROMASTER Vector).External interference filter for 208 - 240 V/380 - 500 V - EN55011 Class A or B compliant (MIDIMASTER Vector).Mains choke.Brake resistors (MICROMASTER Vector, MIDIMASTER Vector).Brake units (MIDIMASTER Vector).Output dV/dt filters.Output chokes.Multi-lingual Clear Text Operator Panel.SIMOVIS PC commissioning and diagnostics program runningunder Windows 95 or NT.CB15 PROFIBUS DP Module.CAN Bus Module, supporting the CAN OPEN protocol.Siemens DA 64 – 1998/99 (04/99) 1/5
Page 1 and 2: MICROMASTERMICROMASTER VectorMIDIMA
Page 5: MICROMASTERMICROMASTER VectorMIDIMA
Page 55 and 56: Standard ApplicationsMICROMASTERMIC
Page 57 and 58:
Standard ApplicationsMICROMASTERMIC
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
MICROMASTERMICROMASTER VectorMIDIMA
Page 67 and 68:
Communications/InterfacesMICROMASTE
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Inverter Selection and Ordering Dat
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
COMBIMASTER & MICROMASTER Integrate
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
AppendixMICROMASTERMICROMASTER Vect
show all

MicroMaster 6SE92 - ECT Sales & Service

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?