MicroMaster 6SE92 - ECT Sales & Service

Standard ApplicationsMICROMASTERMICROMASTER VectorMIDIMASTER VectorSystem Specifications:MotorControl SystemDriveDrive Control Interface7.5 kW 230 V 3 phase induction motor with built-in PTC thermistorCustom controllerMICROMASTER Vector 6SE32 7.5 kW 380 VDigital input control with Run Right, Run Left, 8 fixed frequencies, 2 selectable ramp rates,additional adjustment of fixed frequency by analogue inputParameter settings for this application which are changed from their defaults:Note that P009 must be set to 2 or 3 before parameter numbers above P009 can be modified.Number Value MeaningP002 1.0 Ramp Up time 1.0 sP003 1.0 Ramp Down time 1.0 sP006 2 Fixed Frequency OperationP007 0 Drive control via digital inputsP013 150.00 Maximum output frequency 150.00 HzP024 1 Analogue Input Setpoint (0-50 Hz) added to selected frequencyP033 20.0 Alternative Ramp Up time 20.0 sP034 20.0 Alternative Ramp Down time 20.0 sP043 20.00 Fixed Frequency 3 = 20.00 HzP044 40.00 Fixed Frequency 4 = 40.00 HzP046 60.00 fixed Frequency 5 = 60.00 HzP047 80.00 Fixed Frequency 6 = 80.00 HzP048 100.00 fixed Frequency 7 = 100.00 HzP049 150.00 Fixed Frequency 8 = 150. 00HzP053 17 Din 3 Binary Coded fixed frequency selection of fixed frequencies 1 to 8P054 17 Din 4 Binary Coded fixed frequency selection of fixed frequencies 1 to 8P055 17 Din 5 Binary Coded fixed frequency selection of fixed frequencies 1 to 8P356 16 Select between normal and alternative ramp ratesP062 7 Inverter setpoint reachedP077 3 Sensorless Vector control modeP080 0.85 Motor rating plate power factor = 0.85P082 1380 Motor rating plate speed = 1380 RPMP083 3.30 Motor rating plate current = 3.3 AP087 1 Enable Motor PTC ProtectionThe motor rating plate parameters correspond to a 1LA2 750W 4 pole motor connected in Delta.(7.5kW)4/2 Siemens DA 64 – 1998/99 (04/99)