MicroMaster 6SE92 - ECT Sales & Service

More documents

Recommendations

Info

COMBIMASTER & MICROMASTER Integrated8.8 COMBIMASTER Options8.8.1 Clear Text DisplayThe optional Clear Text Display is intended to enhance theease of use of the COMBIMASTER. For a detaileddescription, please refer to section 5.8.8.2 PROFIBUS CB155• Simply fits to the side of the COMBIMASTER inverterusing two screws.• No separate power supply necessary.• Digital and analogue inputs can be read and the digitaloutput controlled via the serial bus.• Approx. 5 ms response time to process data.• Output frequency (and therefore motor speed) can becontrolled locally on the drive or over the serial bus.• Multi-mode operation possible, whereby control data canbe input via the terminal block (digital inputs) and setpointover the serial bus. Alternatively, the setpoint can be froma local source (analogue input) with the drive control overthe serial bus.• All drive parameters are accessible over the serial link.The PROFIBUS module fits to the side of theCOMBIMASTER using two screws.COMBIMASTER PROFIBUS Accessories• The following PROFIBUS accessories are available forCOMBIMASTER. All are rated IP65 minimum.This option allows the COMBIMASTER to be controlled via aPROFIBUS-DP serial bus (SINEC L2-DP).Features:• Permits fast cyclic communications via a PROFIBUSconnection.• Supports all PROFIBUS baud rates up to 12MBd.• Control of up to 125 inverters using PROFIBUS-DPprotocol (with repeaters).• Conforms with the relevant parts of DIN 19245 andEN50170, guaranteeing open communications on a serialbus system. It can be used with other PROFIBUS-DP/SINEC L2-DP peripheral devices on the serial bus.Data format conforms to the VDI/VDE directive 3689“PROFIBUS Profile for Variable Speed Drives”.• Can be easily configured using Siemens COM ET 200,COM ET Windows or S7 Manager software.• CM PROFIBUS T Connector - This fits to the PROFIBUSmodule, and allows in/out PROFIBUS cables to beconnected. It also contains the necessary terminatingnetwork for 12 Mbaud operation. It is fitted with two femalecircular connectors, and the cable to the CB155.• CM PROFIBUS Terminator - This houses the resistiveterminating devices required at each end of a PROFIBUSlink. It can be fitted to the last COMBIMASTER T piece inthe link.• CM PROFIBUS Cable 1m - 1 metre PROFIBUS cablefitted with two male circular connectors.• CM PROFIBUS Cable 5m - 5 metre PROFIBUS cablefitted with two male circular connectors.• CM PROFIBUS Cable 10m - 10 metre PROFIBUS cablefitted with two male circular connectors.• CM PROFIBUS cable link (10cm) - 10cm of PROFIBUScable fitted with 2 female circular connectors, forconnecting two lengths of cable.• Simple integration into a SIMATIC S5 or S7 PLC systemusing specially designed functional blocks (S5) andsoftware modules (S7).8/30 Siemens DA 64 – 1998/99 (004/99
COMBIMASTER & MICROMASTER Integrated6SE9996-0XA18COMBIMASTERCOMBIMASTERCOMBIMASTERSK200 SK200 SK200CB155Cable ACB155CB155T CONNECTORCable BT CONNECTORT CONNECTORCable CINTERCONNECTING CABLES - One ormore cables joined by cable links.TERMINATORBUS MASTERFigure 10:Typical PROFIBUS installation, showing use of accessoriesPROFIBUS Component Order Number Drawing ReferencePROFIBUS module CB155 (for issue B units)6SE9996-0XA18 Includes Cable A(for issue A units)6SE9996-0XA20PROFIBUS T Connector 6SE9996-0XA21 Includes Cable BPROFIBUS Terminator6SE9996-0XA22PROFIBUS Cable 1m 6SE9996-0XA23 Cable CPROFIBUS Cable 5m 6SE9996-0XA24 Cable CPROFIBUS Cable 10m 6SE9996-0XA25 Cable CPROFIBUS cable link 6SE9996-0XA26 Used for joining lengths of cable CNotes:1. A Clear Text Display (OPM2) is required to set theCOMBIMASTER parameters prior to connecting thePROFIBUS module.2. The PROFIBUS Module may only be connected ordisconnected from the drive when the drive is poweredoff.3. The PROFIBUS module must only be connected to thedrive with the cable supplied for the purpose.4. The PROFIBUS module cannot be used simultaneouslywith the Clear Text Display module.The data structure for communication over PROFIBUS-DPcan be either PPO type 1 or PPO type 3 as specified inVDI/VDE 3689. This means in practice that process data(control words, setpoint in the transmitted telegram and statuswords, actual values in the received telegram) is always sent.Parameter data exchange may, however, be blocked if bus orPLC memory space is at a premium. The data structure andthus the PPO type is normally specified by the bus master. Ifno PPO type is specified (e.g. if a combined DP/FMS busmaster is used), then the default PPO type is type 1(parameter data enabled).Parameter write access over the serial link can be enabled orblocked as required. Parameter read access is permanentlyenabled, allowing continuous read out of drive data,diagnostics, fault messages etc. A visualisation system canthus be realised with minimal effort.The PROFIBUS cable is connected to the 5-way miniaturecircular socket on the side of the PROFIBUS Module, via aspecial ‘T’ connector which fits to the edge of the module.Siemens DA 64 – 1998/99 (04/99) 8/31
Page 1 and 2:
MICROMASTERMICROMASTER VectorMIDIMA
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Standard ApplicationsMICROMASTERMIC
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Communications/InterfacesMICROMASTE
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Inverter Selection and Ordering Dat
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110: MICROMASTERMICROMASTER VectorMIDIMA
Page 131 and 132: COMBIMASTER & MICROMASTER Integrate
Page 159: COMBIMASTER & MICROMASTER Integrate
Page 169 and 170: AppendixMICROMASTERMICROMASTER Vect
show all

MicroMaster 6SE92 - ECT Sales & Service

Create successful ePaper yourself

Delete template?

Save as template?