MicroMaster 6SE92 - ECT Sales & Service

More documents

Recommendations

Info

COMBIMASTER & MICROMASTER Integrated8.6.3 Serial RS 485 InterfaceThe RS 485 interface of the COMBIMASTER operates withthe USS protocol, can be networked with 31 nodes through abus and permits a maximum data transmission rate of 19200Baud. The RS 485 interface is accessible via a circular IP65connector (SK200). The figure below gives the pinassignment.• Illuminated high resolution LCD screen with adjustablecontrast.• 7 languages.• Central device for up to 31 inverters which are networkedtogether via USS.• Up to 10 parameter sets can be stored in non-volatilememory for uploading and downloading.213541 - +5V2 - N (-)3 - 0V4 - P (+)5 - no connectionSK200 Socket• Help texts for diagnosing faults.• RS232 interface for connecting to a PC.The unit is connected to the drive via a cable and used as ahand-held terminal. A mounting kit is also provided to allowthe unit to be fitted to a cabinet door and thus used as a lowcost man machine interface.A 6V power supply may be connected to allow access to theinternally stored parameters without connecting the panel to adrive.Notes:Also refer to the documentation: "Using the USS protocol for6SE21 SIMOVERT drive converters and MICROMASTER“:Order No. E20125-B0001-S302-A1 (German)Order No. E20125-B0001-S302-A1-7600 (English)It is not possible to simultaneously connect the PROFIBUSModule and the Clear Text Display to the drive.8.6.4 Control Terminal StripsAll of the functions required to operate and monitorCOMBIMASTER are accessible via control terminal strips.The Display is automatically activated when it is connected toa COMBIMASTER or powered up.JOGButtonRUN / STOPInducatorRUNButtonSTOPButtonRUNP000 RUNNING →RPM=1250F=50.00HzI=1.5A M=125% P ↕STOPJogMenuPLCDDisplayFORWARD / REVERSEButtonUP / INCREASEFrequencyDOWN / DECREASEFrequency• Control commands, e.g. on/off, clockwise/counterclockwise,jog.• Analogue setpoint input.• Digital setpoint inputs, e.g. fixed frequency.MENUButtonParameterisationButton• Digital output, e.g. operation, alarm.The response times of the inputs are as follows:Figure 9Main Menu Screen• Digital input:20 ms, depending on the de-bounce time (P056).• Analogue input:approx. 15 ms for step signals (> 0.5 V).• RS 485 interface (SK200 only, not available on terminalstrip):approx. 5 - 20 ms.8.6.5 Clear Text Display (Optional)The optional Clear Text Display is intended to enhance theease of use of the COMBIMASTER, and to allowparameterisation, if the factory settings are not suitable forthe application. The user is offered a text-driven format forcommissioning, parameterising, configuring and operating theinverter. The following features are included:Dimensions H x W x DCurrent drain at 5 VDegree of protectionTable 2:Technical Data130 mm x 73 mm x 40 mm200 mAIP54All the main functions are accessible from this screen. Onpower-up, unless configured otherwise, the panel will showthe Operating Display. The status LED indicates whether thedrive is running.8.6.6 RS232 InterfaceThe Clear Text Display is fitted with an RS232 interface toallow the drive to be connected to a PC. Note that an external9V power supply (unregulated) is required to use this feature.Section 8.7 gives the ordering information for the OPM2 ClearText Operator Panel together with all the other options.8/24 Siemens DA 64 – 1998/99
COMBIMASTER & MICROMASTER Integrated8.7 COMBIMASTER Selection and Ordering Data8.7.1 COMBIMASTER Motor Data TablesCOMBIMASTERType1 AC 208 V – 240 VInverterCase SizeInput SupplycurrentAMotorRated Power Rated speed Rated Torque Frame SizeW2polerpmCM12 CS A 1,8 120 2710 1315 0,41 0,88 56 63CM25 CS A 3,2 250 2725 1325 0,86 1,8 63 71CM37 CS A 4,6 370 2750 1375 1,3 2,5 71 71CM55 CS A 6,2 550 2790 1395 1,9 3,7 71 80CM75 CS A 8,2 750 2850 1395 2,5 5,1 80 803 AC 208 V – 240 VCM12/2 CS A 1,1 120 2710 1315 0,41 0,88 56 63CM25/2 CS A 1,9 250 2725 1325 0,86 1,8 63 71CM37/2 CS A 2,7 370 2750 1375 1,3 2,5 71 71CM55/2 CS A 3,6 550 2790 1395 1,9 3,7 71 80CM75/2 CS A 4,7 750 2850 1395 2,5 5,1 80 803 AC 380 V – 480 VCM37/3 CS A 2,2 370 2750 1375 1,3 2,5 71 71CM55/3 CS A 2,8 550 2790 1395 1,9 3,7 73 80CM75/3 CS A 3,7 750 2850 1395 2,5 5,1 80 80CM110/3 CS A 4,9 1100 2835 1410 3,7 7,5 80 90SCM150/3 CS A 5,9 1500 2860 1410 5,0 10 90S 90LCM150/3 CS B† 4.2 1500 2860 1410 5.0 10 90S 90LCM220/3 CS B 4,7 2200 2850 1420 7,4 15 90L 100LCM300/3 CS B 6,4 3000 2895 1430 9,8 20 100L 100LCM400/3 CS B 10,0 4000 2895 1435 13 27 112M 112MCM550/3 CS B 12,2 5500 2910 1450 18 36 132S 132SCM750/3 CS B 16,0 7500 2910 1450 25 49 132S 132M3 AC 460 V – 500 VCM37/3 CS A 2,2 370(430)* 2750** 1375** 1,3 2,5 71 71CM55/3 CS A 2,8 550(630)* 2790** 1395** 1,9 3,7 73 80CM75/3 CS A 3,7 750(860)* 2850** 1395** 2,5 5,1 80 80CM110/3 CS A 4,9 1100(1300)* 2835** 1410** 3,7 7,5 80 90SCM150/3 CS A 5,9 1500(1750)* 2860** 1410** 5,0 10 90S 90LCM150/3 CS B† 3.5 1500 (1750)* 2860** 1410** 5.0 10 90S 90LCM220/3 CS B 4,7 2200(2550)* 2850** 1420** 7,4 15 90L 100LCM300/3 CS B 6,4 3000(3450)* 2895** 1430** 9,8 20 100L 100LCM400/3 CS B 10,0 4000(4600)* 2895** 1435** 13 27 112M 112MCM550/3 CS B 12,2 5500(6300)* 2910** 1450** 18 36 132S 132SCM750/3 CS B 16,0 7500(8600)* 2910** 1450** 25 49 132S 132M4polerpm2poleNm4poleNm2pole4pole† - Available for existing applications, for new applications, use the COMBIMASTER with CS A inverter.* - Figures in brackets show power for motor operation at 60Hz/460V.** - Speed shown is for 50Hz motor frequency. Speed is approximately 20% higher at 60Hz.Siemens DA 64 – 1998/99 (04/99) 8/25
Page 1 and 2:
MICROMASTERMICROMASTER VectorMIDIMA
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Standard ApplicationsMICROMASTERMIC
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Communications/InterfacesMICROMASTE
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Inverter Selection and Ordering Dat
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104: MICROMASTERMICROMASTER VectorMIDIMA
Page 131 and 132: COMBIMASTER & MICROMASTER Integrate
Page 153: COMBIMASTER & MICROMASTER Integrate
Page 169 and 170: AppendixMICROMASTERMICROMASTER Vect
show all

MicroMaster 6SE92 - ECT Sales & Service

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?