MicroMaster 6SE92 - ECT Sales & Service

COMBIMASTER & MICROMASTER IntegratedMICROMASTER Integrated Order Numbers must alwayshave a customer code, or a MIP code added.The customer code is added by appending a -Z=C•• to theOrder Number where •• is the customer number. If nocustomer code has been assigned, the MIP code must beused (see table below). (Customer/MIP codes are NOT usedfor COMBIMASTER 1UA7 numbers.)To specify an inverter set up for a two pole motor, the optioncode M88 should be used.For further clarification, see the table of examples below.MIP/Customer Codes - one of these MUST be used.Inverter and Motor interface plate combinationCase Size A / B MICROMASTER Integrated with 1LA7 Motor Interface PlateCase Size A or B MICROMASTER Integrated with no interface plate (spare inverter)Customer/MIP CodesC87C00The following options can be ordered separately, or can be added to the MICROMASTER Integrated Order Number using theoption short code, if one exists.All the options can be customer fitted if required.Option Short Code Order NumberFan assembly for CS B M41 6SE9996-0XA02Resistor Braking unit for CS B - 6SE9996-0XA11Mechanical brake control for CS B - 6SE9996-0XA10Fan assembly for CS A M41 6SE9996-0XA01Mechanical brake control for CS A *6SE9996-0XA07PROFIBUS module CB155 (for CS B issue A units only) - 6SE9996-0XA20PROFIBUS module CB155 (for CS A units, and CS B issue B units) - 6SE9996-0XA18PROFIBUS T Connector - 6SE9996-0XA21PROFIBUS Terminator - 6SE9996-0XA22PROFIBUS Cable 1m - 6SE9996-0XA23PROFIBUS Cable 5m - 6SE9996-0XA24PROFIBUS Cable 10m - 6SE9996-0XA25PROFIBUS cable link - 6SE9996-0XA26OPM2 (Clear text display) - 6SE3290-0XX87-8BF0Cable for OPM2 (unscreened for CS B issue A units only) - 6SE3290-0XX87-8SK0Cable for OPM2 (screened for CS A units, and CS B issue B units) - 6SE9996-0XA31Applications Handbook (English) - 6SE9996-0XA35Operating Instructions (English) - 6SE9996-0XA36* Mechanical Brake options for Case Size A units : availability due 2 nd Qtr 1999. Please consult your sales office forlatest information.8/36 Siemens DA 64 – 1998/99 (004/99