MicroMaster 6SE92 - ECT Sales & Service

COMBIMASTER & MICROMASTER Integrated8.1.4 COMBIMASTER International Standards ConformityCE Mark:The COMBIMASTER complies with the requirements of theLow Voltage Directive, 73/23/EEC, and the EMC directive89/336/EEC. The CE Mark on the units demonstrates thisconformity. A declaration of conformity can be issued. Theunits are certified to comply with the following standards:Electromagnetic Compatibility:The table below lists the measured results for emissions ofand immunity to interference for COMBIMASTER. The driveswere installed according to the guidelines with shieldedcontrol cables and optional mains filters.EN60204-1EN60146-1-1Safety of Machinery, ElectricalEquipment or MachinesGeneral Requirements forSemiconductor converters and linecommutated convertersRFI Emissions EN55011(VDE 0875 Part 11)Test Measurement Tested Value Required limit for EN50082/50082ESD Immunity EN61000-4-2(VDE 0847 Part 4-2)Electric Field ImmunityEN61000-4-3(VDE 0847 Part 4-3)Burst Interference ImmunityEN61000-4-4(VDE 0847 Part 4-4)Surge Immunity EN61000-4-5(VDE 0847 Part 4-5)Conducted via Mains cable andradiated through airESD through airESD through direct contact230V 1ph Class A Filter ≥ Class A230V 1ph Class B Filter ≥ Class B400V 3ph Class A Filter ≥ Class A400V 3ph Class B Filter ≥ Class BLevel 4 15kVLevel 4 8kVClass AClass BClass AClass BLevel 3 8kVLevel 3 4kVElectric Field applied to unit 10V/m 26-1000MHz 10V/mApplied to all cable terminations:Mains LeadsMotor LeadsControl LeadsBraking Resistor/Module LeadsDC Link LeadsApplied to all mains cable:Level 4: 4kVLevel 4: 4kV4kVLevel 4: 4kVLevel 4: 4kV4kV Asymmetric2kV Symmetric2kV2kV2kV2kV2kV4kV Asymmetric2kV SymmetricTable 1 -Test ResultsSiemens DA 64 – 1998/99 (04/99) 8/3