MicroMaster 6SE92 - ECT Sales & Service

AppendixMICROMASTERMICROMASTER VectorMIDIMASTER VectorPageLLine-protection fuses 3/13; 8/26Line reactors 3/28-3/31;6/8-6/21Load torque – square-law and constant 7/3-7/27Load-side components 6/8-6/21MMaximum cable lengthswithout output reactors3/7;7/2with output reactors3/7Motor-inverter combinationSee COMBIMASTERMotor/inverter correlation 7/3-7/27Motor protection 7/2Motor-side filters 6/1-6/21Motors with “d” type protection 7/2OOperation and observationMICROMASTER, MIDIMASTER Vector 5/1COMBIMASTER8/21OptionsMICROMASTER (Vector)6/7MIDIMASTER Vector6/16COMBIMASTER8/2; 8/28MICROMASTER Integrated8/36Ordering numbersSee Selection and ordering dataOutput reactors 6/9-6/21Overload capability 3/1; 8/2PParameter listing 5/11PID control 2/6Planning and design notesMICROMASTER (Vector)3/1- 3/36MIDIMASTER Vector3/1- 3/36COMBIMASTER8/1- 8/34PROFIBUS modulesCB15 MICRO-/MIDIMASTER Vector 5/4CB155 COMBIMASTER8/30Protection, types of 3/5RRelay contact ratings 3/1RS485 and RS232 interfacesMICROMASTER, MIDIMASTER Vector 5/1; 5/3COMBIMASTER8/23; 8/24MICROMASTER INTEGRATED 8/23; 8/24PageSSelection and ordering dataMICROMASTER (Vector)6/1MIDIMASTER Vector6/3COMBIMASTER8/25; 8/27MICROMASTER INTEGRATED 8/35Interference suppression filters6/8-6/21dV/dt filters6/8-6/21Line reactors6/8-6/21Braking resistors3/32Braking units3/33; 3/34Separately ventilated motors 7/1SIMATIC, integration of 5/4; 6/7SIMOVIS 5/7Sizing dataSee Selection and ordering dataSquare-law load torque 7/3-7/27Standard control panel 5/1; 8/24Supply fuses 3/13; 8/26Supply harmonics and impedance 3/9Supply voltages 3/1; 8/2TTechnical dataMICROMASTER (Vector)1/2; 3/1MIDIMASTER Vector1/2; 3/1COMBIMASTER8/2Tee connectors 8/28VVector control 2/2V/f mode 2/4Voltage derating 3/11Voltage limiting filters (dV/dt) 6/8- 6/21WWeightsMICROMASTER (Vector)3/2MIDIMASTER Vector3/3; 3/4