TOOL4COOLÂ® Operating Instructions - Secop

More documents

Recommendations

Info

OperatingInstructions‘Start’ shows when the log is stopped‘Stop’ shows while the log is runningExit current Tab ViewTo leave any Tab View (to the right of the window), click one level up in the Tree View (to the left of thewindow).For example, click on the network name (COM3) to leave the Logger Tab View shown above.18
4.SOFTWARE CONFIGURATIONOperatingInstructionsThis chapter explains how to• Set up a network so Tool4Cool® LabEdition can recognise a Secop controller which has beenconnected to the computer.• Enter the Product Key, which grants access to a Secop controller.• Import a Parameter Definition File, when this is specified in the controller Operating Instructionsand Quick Start Guide.After completing these steps, the user will be able to view the Secop controller parameters inTool4Cool® LabEdition, and will have access to the Tool4Cool® LabEdition functions.Network refers to one or more Secop controllers to which the computer is connected.4.1ConnectNetworkTool4Cool® LabEdition can be connected to a network of one or more Secop controllers, or to multiplenetworks of one or more controllers.Tool4Cool® LabEdition can communicate with controllers in different geographical locations.Set up the hardwareFirst, consult the controller Quick Start Guide to make cable and adaptor connections, and install thenecessary drivers on the computer.Set up the softwareNext, set up the Tool4Cool® LabEdition software to recognise the Secop controllers which are connectedto the computer.Procedure• Open the Tool4Cool® LabEdition software by selecting the Tool4Cool® LabEdition shortcut in theStart menu.• In the menu bar, click on File.• Select Connect Network from the drop-down menu.The Connect Network dialog box will appear.19
Page 1 and 2: With more than 50years of experienc
Page 3 and 4: OperatingInstructions7. Troubleshoo
Page 5 and 6: OperatingInstructionsSystem require
Page 7 and 8: OperatingInstructions• To install
Page 9 and 10: OperatingInstructionsResult:When To
Page 11 and 12: OperatingInstructions2.3Installatio
Page 13 and 14: OperatingInstructions• Now the so
Page 16 and 17: OperatingInstructionsNetwork NameCo
Page 20 and 21: OperatingInstructionsExample:4.2Loc
Page 22 and 23: OperatingInstructionsExample:Networ
Page 24 and 25: OperatingInstructionsExample:Select
Page 26 and 27: OperatingInstructionsExample:Networ
Page 28 and 29: OperatingInstructions4.4 RefreshNet
Page 30 and 31: OperatingInstructions• Click on t
Page 32 and 33: OperatingInstructionsHow to delete
Page 34 and 35: 5.OPERATIONOperatingInstructionsThi
Page 36 and 37: OperatingInstructionsExample:Shows
Page 38 and 39: OperatingInstructionsData LogProced
Page 40 and 41: OperatingInstructionsExample:Tree V
Page 42 and 43: OperatingInstructions5.6 ChangePara
Page 44 and 45: OperatingInstructionsChange the def
Page 46 and 47: OperatingInstructions• Click on t
Page 48 and 49: OperatingInstructionsExample:Export
Page 50 and 51: OperatingInstructions5.8Sort Tables
Page 52 and 53: OperatingInstructionsLog File Setup
Page 54 and 55: OperatingInstructionsStart Data Log
Page 56 and 57: OperatingInstructionsTo view a data
Page 58 and 59: • The Save as dialog box will ope
Page 60 and 61: OperatingInstructions5.10Plot Logge
Page 62 and 63: OperatingInstructionsZoom on the ve
Page 64 and 65: OperatingInstructionsPlotting for m
Page 66 and 67: OperatingInstructionsResult:• The
Page 68 and 69:
OperatingInstructionsExample of Pri
Page 70 and 71:
6.HOW TO CUSTOMIZE A CONTROLLEROper
Page 72 and 73:
OperatingInstructions7.3ConnectedCo
Page 74 and 75:
OperatingInstructions1. Remove the
Page 76 and 77:
OperatingInstructions7.14Unit Statu
Page 78:
www.secop.comTOOL4COOL® SOFTWARE -
show all

TOOL4COOLÂ® Operating Instructions - Secop

Create successful ePaper yourself

Delete template?

Save as template?