TOOL4COOL® Operating Instructions - Secop

OperatingInstructions4.4 RefreshNetworkThe Refresh network function is used to detect the connection of new controllers, or removal of controllers,from the network. Refresh network is useful when the network is configured with Refresh networkOFF, and auto refresh is therefore disabled.Procedure• Right-click on the connection port name in the Tree View.• Select Refresh from the drop-down menu.Result• The network will be scanned to detect all connected controllers. The connected controllers will bedisplayed in the Tree View.4.5 DisconnectNetworkThe Disconnect network function is used to disconnect a network.Procedure• Right-click on the connection port name in the Tree View.• Select Disconnect from the drop-down menu.Result• When the controller or network is disconnected it will disappear from the Tree View.4.6 Find aControllerusing Add UnitUse the Add Unit function as a short-cut, to navigate directly to a specific controller connected to a network.The Add Unit function is normally used with network configuration setting Refresh Network OFF.When used in conjunction with network configuration setting Refresh Network ON, the Add new unit functionprovides a quick alternative to finding a controller via automatic scanning of all network nodes, whichcan be time-consuming.Procedure:• Right-click on the network name in the Tree View• Select Add Unit from the pop-up menu28