TOOL4COOLÂ® Operating Instructions - Secop

More documents

Recommendations

Info

OperatingInstructions4.4 RefreshNetworkThe Refresh network function is used to detect the connection of new controllers, or removal of controllers,from the network. Refresh network is useful when the network is configured with Refresh networkOFF, and auto refresh is therefore disabled.Procedure• Right-click on the connection port name in the Tree View.• Select Refresh from the drop-down menu.Result• The network will be scanned to detect all connected controllers. The connected controllers will bedisplayed in the Tree View.4.5 DisconnectNetworkThe Disconnect network function is used to disconnect a network.Procedure• Right-click on the connection port name in the Tree View.• Select Disconnect from the drop-down menu.Result• When the controller or network is disconnected it will disappear from the Tree View.4.6 Find aControllerusing Add UnitUse the Add Unit function as a short-cut, to navigate directly to a specific controller connected to a network.The Add Unit function is normally used with network configuration setting Refresh Network OFF.When used in conjunction with network configuration setting Refresh Network ON, the Add new unit functionprovides a quick alternative to finding a controller via automatic scanning of all network nodes, whichcan be time-consuming.Procedure:• Right-click on the network name in the Tree View• Select Add Unit from the pop-up menu28
OperatingInstructions• The Add Unit dialog appears.Enter the node number of a controller and click on OK.Important:The node number must lie within the node range configured for the network(First network node …. Last network node)• A red arrow appears beside the network name.ExampleRed arrow beside thenetwork name29
Page 1 and 2: With more than 50years of experienc
Page 3 and 4: OperatingInstructions7. Troubleshoo
Page 5 and 6: OperatingInstructionsSystem require
Page 7 and 8: OperatingInstructions• To install
Page 9 and 10: OperatingInstructionsResult:When To
Page 11 and 12: OperatingInstructions2.3Installatio
Page 13 and 14: OperatingInstructions• Now the so
Page 16 and 17: OperatingInstructionsNetwork NameCo
Page 18 and 19: OperatingInstructions‘Start’ sh
Page 20 and 21: OperatingInstructionsExample:4.2Loc
Page 22 and 23: OperatingInstructionsExample:Networ
Page 24 and 25: OperatingInstructionsExample:Select
Page 26 and 27: OperatingInstructionsExample:Networ
Page 30 and 31: OperatingInstructions• Click on t
Page 32 and 33: OperatingInstructionsHow to delete
Page 34 and 35: 5.OPERATIONOperatingInstructionsThi
Page 36 and 37: OperatingInstructionsExample:Shows
Page 38 and 39: OperatingInstructionsData LogProced
Page 40 and 41: OperatingInstructionsExample:Tree V
Page 42 and 43: OperatingInstructions5.6 ChangePara
Page 44 and 45: OperatingInstructionsChange the def
Page 46 and 47: OperatingInstructions• Click on t
Page 48 and 49: OperatingInstructionsExample:Export
Page 50 and 51: OperatingInstructions5.8Sort Tables
Page 52 and 53: OperatingInstructionsLog File Setup
Page 54 and 55: OperatingInstructionsStart Data Log
Page 56 and 57: OperatingInstructionsTo view a data
Page 58 and 59: • The Save as dialog box will ope
Page 60 and 61: OperatingInstructions5.10Plot Logge
Page 62 and 63: OperatingInstructionsZoom on the ve
Page 64 and 65: OperatingInstructionsPlotting for m
Page 66 and 67: OperatingInstructionsResult:• The
Page 68 and 69: OperatingInstructionsExample of Pri
Page 70 and 71: 6.HOW TO CUSTOMIZE A CONTROLLEROper
Page 72 and 73: OperatingInstructions7.3ConnectedCo
Page 74 and 75: OperatingInstructions1. Remove the
Page 76 and 77: OperatingInstructions7.14Unit Statu
Page 78:
www.secop.comTOOL4COOL® SOFTWARE -
show all

TOOL4COOLÂ® Operating Instructions - Secop

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?