TOOL4COOL® Operating Instructions - Secop

OperatingInstructionsResult:• A plot of the selected parameters is displayed.Example of Stacked Plot:Vertical axis scale variesto give maximum zoomfor the data displayedSample data Plot ID LegendScroll left or right to view an earlieror later ‘window’ of timeFeatures of a plot• A legend is located at the top corner, showingo Line colour for each parametero Real-time data value, or the most recent value available• The plot ID on the right shows the controller serial number and the time of final data.• The scale of the horizontal axis is defined by the selection in Plot Setup.• To view the plot for an earlier or later period (‘window’) of time, scroll to the left or right along thehorizontal axis.• The scale of the vertical axis adjusts to fit the range of data on display, always providing maximumzoom. Therefore the scale of the vertical axis is likely to change when scrolling horizontally to a new ‘window’ of time to view a new set of data.• Click on a plot to activate it.• Right-click on a line in the plot to view the sample data at that point. The data are presented asTime; Parameter name; Parameter value in a bar directly above the plot.Re-scaling the horizontal axis (x-axis)• To reduce or increase the scale on the horizontal (time) axis, reduce the time span in the Plot Setup.• There is no zoom function for the horizontal axis61