Practical_modern_SCADA_protocols_-_dnp3,_60870-5_and_Related_Systems

Recommendations

Info

240 Practical Modern SCADA Protocols: DNP3, 60870.5 and Related Systems Types 2, 30 Single-point with time INFORMATION OBJECT TYPE: 2, 30 CODE: M_SP_TA_1, M_SP_TB_1 DESCRIPTION: Single-point information with time tag VALID WITH SQ: 0 Information Object for SQ = 0 (Sequence of Information Objects) Information Object Address IV NT SB BL SPI SIQ CP24Time2a or CP56Time2a Three or seven-octet binary time Valid cause of transmission codes Spontaneous Requested Return of information caused by remote command Return of information caused by local command Notes SIQ – Single-point information with quality descriptor Type 2 has three-octet time. Type 30 has seven-octet time
Fundamentals of IEC 60870-5 241 Type 3 Double-point without time INFORMATION OBJECT TYPE: 3 CODE: M_DP_NA_1 DESCRIPTION: Double-point information without time tag VALID WITH SQ: 0, 1 Information Object for SQ = 0 (Sequence of Information Objects) Information Object Address IV NT SB BL DPI DIQ – Double point with quality Information Object for SQ = 1 (Sequence of Information Elements) Information Object Address IV NT SB BL DPI DIQ – Information element 1 IV NT SB BL DPI DIQ – Information element N Valid cause of transmission codes Background scan Spontaneous Requested Return of information caused by remote command Return of information caused by local command Interrogated by station interrogation Interrogated by group G interrogation, G= Notes DIQ – Double-point information with quality descriptor
Page 2 and 3:
Practical Modern SCADA Protocols: D
Page 4 and 5:
Practical Modern SCADA Protocols: D
Page 6 and 7:
Contents Preface ..................
Page 8 and 9:
Contents vii 12.6 Frame reception .
Page 10 and 11:
Preface ix Chapter 3: Open SCADA pr
Page 12 and 13:
1 Introduction Objectives When you
Page 14 and 15:
Introduction 3 Figure 1.2 PC to IED
Page 16 and 17:
Introduction 5 The interconnection
Page 18 and 19:
Introduction 7 a number of sub-path
Page 20 and 21:
Introduction 9 The Internet protoco
Page 22 and 23:
Introduction 11 Outside the utiliti
Page 24 and 25:
Fundamentals of SCADA communication
Page 26 and 27:
Page 28 and 29:
Key features of SCADA software incl
Page 30 and 31:
Page 32 and 33:
2.2.2 Control processor unit (or CP
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
2.5.2 Multi-point architecture (Mul
Page 42 and 43:
2.6 Communication philosophies Fund
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Pin 8 - Data carrier detect (DCD) F
Page 52 and 53:
2.7.6 Synchronous communications 2.
Page 54 and 55:
The two most common modes of operat
Page 56 and 57:
2.8.3 Error control/flow control Fu
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
3 Open SCADA protocols DNP3 and IEC
Page 76 and 77:
3.2.2 DNP 3.0 and IEC 60870 protoco
Page 78 and 79:
4.2 Interoperability and open stand
Page 80 and 81:
Preview of DNP3 69 The DNP3 User Gr
Page 82 and 83:
Preview of DNP3 71 The capability t
Page 84 and 85:
5 Fundamentals of distributed netwo
Page 86 and 87:
Fundamentals of distributed network
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
5.3.6 Full-duplex procedures Fundam
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
The message sequences are shown in
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
These rules are illustrated in the
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Freeze functions are typically used
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
6 Advanced considerations of distri
Page 156 and 157:
Advanced considerations of distribu
Page 158 and 159:
Page 161:
Page 165:
Page 169 and 170:
6.2 Interoperability between DNP3 d
Page 171 and 172:
6.3.2 Data classes and events Advan
Page 173 and 174:
Recommendations: 6.3.9 Multiple obj
Page 175 and 176:
6.3.15 Time-tagged binary input eve
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Preview of IEC 60870-5 171 7.2 Stan
Page 189 and 190:
Preview of IEC 60870-5 173 Under IE
Page 191 and 192:
Preview of IEC 60870-5 175 over cor
Page 193 and 194:
8 Fundamentals of IEC 60870-5 8.1 T
Page 195 and 196:
Fundamentals of IEC 60870-5 179 8.1
Page 197 and 198:
8.1.9 IEC 60870-5-101 1995 Fundamen
Page 199 and 200:
Fundamentals of IEC 60870-5 183 pro
Page 201 and 202:
Fundamentals of IEC 60870-5 185 MAS
Page 203 and 204:
8.4 Data link layer Fundamentals of
Page 205 and 206: 8.4.2 Order of information Fundamen
Page 207 and 208: 8.4.5 Unbalanced and balanced trans
Page 209 and 210: Fundamentals of IEC 60870-5 193 Sta
Page 211 and 212: Station/link initialization, balanc
Page 213 and 214: Fundamentals of IEC 60870-5 197 The
Page 215 and 216: Fundamentals of IEC 60870-5 199 To
Page 217 and 218: Function codes from secondary stati
Page 219 and 220: Fundamentals of IEC 60870-5 203 is
Page 221 and 222: The following notes apply to these
Page 223 and 224: Fundamentals of IEC 60870-5 207 Typ
Page 227 and 228: Fundamentals of IEC 60870-5 211 Whe
Page 229 and 230: Fundamentals of IEC 60870-5 213 8.5
Page 231 and 232: Fundamentals of IEC 60870-5 215 to
Page 233 and 234: Fundamentals of IEC 60870-5 217 Mas
Page 235 and 236: Fundamentals of IEC 60870-5 219 Qua
Page 237 and 238: Fundamentals of IEC 60870-5 221 Key
Page 239 and 240: Fundamentals of IEC 60870-5 223 SVA
Page 241 and 242: Fundamentals of IEC 60870-5 225 Key
Page 243 and 244: Fundamentals of IEC 60870-5 227 DCO
Page 245 and 246: 8.6.4 Qualifier information element
Page 247 and 248: Key - QOC Qualifier of command QU Q
Page 249 and 250: Fundamentals of IEC 60870-5 233 SCQ
Page 251 and 252: Fundamentals of IEC 60870-5 235 LOF
Page 253 and 254: Fundamentals of IEC 60870-5 237 FBP
Page 255: Fundamentals of IEC 60870-5 239 In
Page 263 and 264: Fundamentals of IEC 60870-5 247 Val
Page 265 and 266: Type 11 Measured, scaled value Fund
Page 273 and 274: Type 20 Packed single-point with st
Page 275 and 276: Fundamentals of IEC 60870-5 259 Pro
Page 283 and 284: Fundamentals of IEC 60870-5 267 8.7
Page 303 and 304: 9.1.1 Station initialization Advanc
Page 305 and 306: 9.1.2 Data acquisition Advanced con
Page 307 and 308:
Advanced considerations of IEC 6087
Page 309 and 310:
Page 311 and 312:
In Figure 9.4 the following time sy
Page 313 and 314:
Page 315 and 316:
Basic application functions: 9.2.3
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Page 323 and 324:
10 Differences between DNP3 and IEC
Page 325 and 326:
Data objects: Differences between D
Page 327 and 328:
10.2 Which one will win? Difference
Page 329 and 330:
Intelligent electronic devices (IED
Page 331 and 332:
11.2.5 Communications Intelligent e
Page 333 and 334:
Ethernet and TCP/IP networks 317 tr
Page 335 and 336:
Ethernet and TCP/IP networks 319 Th
Page 337 and 338:
Ethernet and TCP/IP networks 321 Fi
Page 339 and 340:
12.2.5 10Broad36 12.2.6 1Base5 Ethe
Page 341 and 342:
Ethernet and TCP/IP networks 325 si
Page 343 and 344:
Ethernet and TCP/IP networks 327 As
Page 345 and 346:
12.8.4 Length Ethernet and TCP/IP n
Page 347 and 348:
Ethernet and TCP/IP networks 331 To
Page 349 and 350:
12.11.8 Fast Ethernet Ethernet and
Page 351 and 352:
12.12 TCP/IP Ethernet and TCP/IP ne
Page 353 and 354:
Ethernet and TCP/IP networks 337
Page 355 and 356:
Ethernet and TCP/IP networks 339 Fi
Page 357 and 358:
Here follows a brief description of
Page 359 and 360:
Unicast addresses Ethernet and TCP/
Page 361 and 362:
The three common fields are: Ethern
Page 363 and 364:
Ethernet and TCP/IP networks 347 Th
Page 365 and 366:
13 Fieldbus and SCADA communication
Page 367 and 368:
Fieldbus and SCADA communications s
Page 369 and 370:
Page 371 and 372:
• Programmable logic controllers
Page 373 and 374:
Page 375 and 376:
Three such ‘services’ are readi
Page 377 and 378:
Figure 13.9 High speed Ethernet and
Page 379 and 380:
14.2 UCA development UCA protocol 3
Page 381 and 382:
14.3.1 Uniform communications infra
Page 383 and 384:
UCA protocol 367 14.3.4 Uniform app
Page 385 and 386:
14.3.5 Uniform data model UCA proto
Page 387 and 388:
Figure 14.6 Device object model ove
Page 389 and 390:
UCA protocol 373 An excellent refer
Page 391 and 392:
Applications of DNP3 and SCADA prot
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
PDS 500 Data Map Applications of DN
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
16 Future developments Objectives W
Page 409 and 410:
Appendix A Glossary 3GPP 10Base2 10
Page 411 and 412:
Appendix A: Glossary 395 ATM Attenu
Page 413 and 414:
Appendix A: Glossary 397 Capacitanc
Page 415 and 416:
Appendix A: Glossary 399 Decibel (d
Page 417 and 418:
Appendix A: Glossary 401 ESS Etherl
Page 419 and 420:
Appendix A: Glossary 403 I/O addres
Page 421 and 422:
Manchester encoding Appendix A: Glo
Page 423 and 424:
Appendix A: Glossary 407 Packet PAD
Page 425 and 426:
Appendix A: Glossary 409 RFI Ring R
Page 427 and 428:
Appendix A: Glossary 411 TDMA TDR T
Page 429 and 430:
Appendix A: Glossary 413 X.25 CCITT
Page 431 and 432:
Appendix B: Implementers of DNP3 41
Page 433 and 434:
Appendix B: Implementers of DNP3 41
Page 435 and 436:
DNP3 device profile Appendix C: Sam
Page 437 and 438:
Appendix C: Sample device profile d
Page 439 and 440:
Page 441 and 442:
Page 443 and 444:
Page 445 and 446:
Software setup Appendix D: Practica
Page 447 and 448:
Appendix D: Practicals 431 1. Set u
Page 449 and 450:
Objectives • To show how a basic
Page 451 and 452:
Implementation/setting up TCP/IP Cl
Page 453 and 454:
Appendix D: Practicals 437 Click on
Page 455 and 456:
Page 457 and 458:
Appendix D: Practicals 441 Now rese
Page 459 and 460:
Appendix D: Practicals 443 Practica
Page 461 and 462:
Appendix D: Practicals 445 This sho
Page 463 and 464:
Appendix D: Practicals 447 Once you
Page 465 and 466:
IMPORTANT NOTICE: Appendix D: Pract
Page 467 and 468:
Appendix D: Practicals 451 (This is
Page 469 and 470:
Appendix D: Practicals 453 PRACTICA
Page 471 and 472:
Click on the Diags button and the f
Page 473 and 474:
Appendix D: Practicals 457 The scre
Page 475 and 476:
Appendix D: Practicals 459 Assume t
Page 477 and 478:
Appendix D: Practicals 461 Problem
Page 479 and 480:
Network Loading Assumptions Item Da
Page 481 and 482:
2. IEC 60870-5-101 Packet Analysis
Page 483 and 484:
3.1.1.1.1 Appendix D: Practicals 46
Page 485 and 486:
Appendix D: Practicals 469 Valid Ca
Page 487 and 488:
3.1.1.1.7 Type 14 INFORMATION OBJEC
Page 489 and 490:
Appendix D: Practicals 473 3.1.1.1.
Page 491 and 492:
Appendix D: Practicals 475 QDS Qual
Page 493 and 494:
Appendix D: Practicals 477 7 6 5 4
Page 495 and 496:
3.1.1.1.11 Communication 1 Appendix
Page 497 and 498:
Communication 1 Answer Appendix D:
Page 499 and 500:
CITECT PRACTICAL For Citect Version
Page 501 and 502:
Appendix D: Practicals 485 Next cli
Page 503 and 504:
Appendix D: Practicals 487 (3) Defi
Page 505 and 506:
Appendix D: Practicals 489
Page 507 and 508:
Appendix D: Practicals 491 (4) Crea
Page 509 and 510:
Appendix D: Practicals 493 Use the
Page 511 and 512:
Page 513 and 514:
Appendix D: Practicals 497 When fin
Page 515 and 516:
Appendix D: Practicals 499 What is
Page 517 and 518:
Communication 2 05640DC405001A00637
Page 519 and 520:
05640DC405001A006378C6C601010200003
Page 521 and 522:
Appendix D: Practicals 505 What are
Page 523 and 524:
Appendix D: Practicals 507 01 01 01
Page 525 and 526:
Appendix D: Practicals 509 E2 81 00
Page 527 and 528:
Appendix D: Practicals 511 At fist
Page 529 and 530:
Appendix D: Practicals 513 Then rem
Page 531 and 532:
Appendix D: Practicals 515 The next
Page 533 and 534:
Packet Interpretation Practical App
Page 535 and 536:
056408C40300A200EA80C5C5171E4405641
Page 537 and 538:
Appendix D: Practicals 521 Communic
Page 539 and 540:
05640DC405001A006378C6C601010200003
Page 541 and 542:
Appendix D: Practicals 525 What is
Page 543 and 544:
01 01 01 01 01 01 01 crc:BB crc:C3
Page 545 and 546:
Appendix D: Practicals 529 Read Dat
Page 547 and 548:
Index 531 Carrier sense with multip
Page 549 and 550:
Index 533 support for protocol, 310
Page 551 and 552:
Index 535 process related, 220 bina
Page 553:
Index 537 signal quality detector,
show all

Practical_modern_SCADA_protocols_-_dnp3,_60870-5_and_Related_Systems

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?