SPW Product Catalogue 2019

KEMPACT TM PULSE 3000
MIG WELDERS
Kempact TM Pulse 3000 represents new ideas in Pulse-MIG welding. New technology made it possible to
design 250 amp compact Pulse-MIG that weight only 22 kg. Kempact Pulse offers a unique combination
of portability and pulse performace that make it unbeatable on market. Kempact TM Pulse that is capable to
weld with Double Pulse, Pulse-MIG, Synergic MIG and MIG/MAG. No matter where you weld on shop or at
site generator compatibility of Kempact Pulse guarantees that the user has always the optimum process
in his use. Kempact TM Pulse has the most commonly used Pulse programs and the user applied programs
can be extended up to 400. The user may store his optimum welding parameters to one of 100 memory
channels that can be controlled from MIG gun. The user manages his welding parameters and special
functions with easy-to-use Kemppi Process Manager.
Kempact TM Pulse 3000 250 Amp 22 kg
BENEFITS
APPLICATIONS
Unbeatable Pulse in power / weight ratio
Sheet metal fabrication
Perfect Pulse Performance
Automotive
Capacity for 400 programs (Double Pulse, Pulse, Synergic MIG)
Installation (Construction)
100 memory channels Shipyard
Extended range with WeldSnake MIG gun
Repair and maintenance
Easy-to-use Process Manager
Car repair
Generator compatible / Polarity change
Kempact TM Pulse 3000 has start option – hot / creep start – that guarantee excellent ignition with all materials and gases. It is possible
to change polarity in Kempact TM Pulse so that it is suitable also to gasless cored wires. Change the polarity for gasless flux cored wire
welding. Wire inch with ‘safety speed’ makes the spool change easy and quick with lower safety risk. KEMPACT TM Pulse machine is
equipped with optical tacometer and 4 wheel wire drive mechanisms providing smooth feeding with Fe, SS and Al wire materials.
The two-wheel undercarriage ST7 allows the KEMPACT TM Pulse 3000 to be mounted away from the workshop floor. If the equipment
has to be moved on shop flor without gas bottle so P 250 simple trolley is nice solution. If the equipment has to be mounted on boom
there is ready made lift hook available for KEMPACT TM Pulse 3000.
Kempact TM Pulse 3000 combined with lightweight 6m WeldSnake 35 MIG gun gives entended working range with aluminium and
stainless steel and makes that traditional clumsy Push-Pull gun are not any more needed. Kemppi MMT 32/35 and PMT 32/35 gas
cooled MIG guns are available in 3m or 4,5m lengths. MIG guns can be equipped with Kemppi’s Patented DL Teflon liner in order to
maximise the welding quality with aluminium and stainless steel wire.
The gun remote control RMT 10 that can be mounted in PMT MIG guns saves time and makes also possible to select the memory
channels
1
TECHNICAL DATA
KEMPACT TM Pulse 3000
Mains voltage
3~400V ±15%, 50/60Hz
Supply cable / Fuse 4x1,5mm 2 /5m - 16A
delayed
Voltage adjustment range 8V - 30V
Loadability 40% 250A
60% 207A
100% 160A
Filler materials Fe, Ss 0.6 - 1,0 mm
Cored wire 0.9 - 1.2 mm
Al 0.9 - 1.2 mm
CuSi 0.8 - 1.0 mm
Wire drive
4 roll
Feed rolls
V-groove/knurled/
Trapez/U-groove
Wire reel
300mm / 15 kg weight
Wire feed speed
1 ... 18 m/min
Gun connector
EURO adapter
Weight
22 kg
Dimension 580 x 280 x 440
Operation temperature range -20C ... +40C
Degree of protection IP23C
PART NUMBER
P1132
WELDING EQUIPMENT
1300 WELDER (1300 935 337)
105