SPW Product Catalogue 2019

WIRES FLUX CORED
STOODY SOS 308L
5
Shieldcrome 308LT-O is a self shielded (or open arc) stainless steel flux cored
wire developed for a wide range of “in situ” downhand welding applications on
19Cr/10Ni type stainless steels including type 201, 202, 301, 302, 304 and 304L.
Shieldcrome 308LT-O is ideal for fast fillet and butt welding applications in the flat
and horizontal-vertical positions.
Classifications:
AWS/ASME-SFA A5.22:
E308LTO-3.
WTIA Tech Note 4/AS 2576:
1315-B7.
Ferrite Number: 8.0
Features:
SHIELDCROME Stainless Steel Flux Cored Wires.
Convenient Self Shielded (Open Arc) Operation For “In situ or Outdoor Applications.
High Deposition Rate Downhand Welding.
For downhand welding application on 19Cr/10Ni type stainless steels including type
301, 302, 304 and 304L.
Typical All Weld Metal Analysis:
C: 0.02% Mn: 1.20% Si: 0.50%
Cr: 20.80% Ni: 10.2%
Typical All Weld Metal Mechanical Properties:
Tensile Strength
600 MPa
Elongation 43%
Actual weld metal mechanical properties achieved with Shieldcrome wires are
influenced by many factors including, base metal analysis, welding parameters / heat
input used, number of weld passes and run placement etc. Please consult your nearest
CIGWELD branch for welding procedure recommendations.
Comparable CIGWELD Products:
Shieldcrome 308LT all positional gas shielded FCAW wire
AWS A5.22:
E308LT1-1 / E308LT1-4.
Shieldcrome 308LTD downhand gas shielded FCAW wire
AWS A5.22:
E308LT0-1 / E308LT0-4.
Autocraft 308LSi GMAW wire
AWS A5.9:
ER308LSi.
Comweld 308L Gas / TIG rod
AWS A5.9:
ER308L.
Satincrome 308L-17 electrode
AWS A5.4:
E308L-17.
Recommended Shielding Gases:
Not required.
Packaging Data:
Wire Diameter Wire Type Type Pack Weight Pack Part No.
2.4 308LT-O Coil 22kg 11175400
Operating Data:
All welding conditions recommended below are for use with semi-automatic self shielded operation and DC electrode positive.
Wire Diameter (mm) Current Range (amps) Voltage Range (volts) Electrode Stickout E.S.O. (mm) Welding Positions
2.4 300-350 28-30 20-25 Flat
2.4 300-350 28-30 20-25 HV Fillet
These machine settings are a guide only. Actual voltage, welding current and E.S.O. used will depend on machine characteristics, plate thickness, run size, shielding gas and
operator technique etc.
STOODY SOS 309L
CONSUMABLES
Shieldcrome 309LT-O is a self shielded (or open arc) stainless steel flux cored wire
developed for a wide range of “in situ” downhand welding applications on matching
309 and 309L stainless steels. Shieldcrome 309LT-O is also recommended for the
dissimilar fillet and butt welding of other ‘300 series’ austenitic stainless steels to
mild or low alloy steels and for the “buttering” of steels prior to the application of
hardfacing.
Classifications:
AWS/ASME-SFA A5.22:
E309LTO-3.
WTIA Tech Note 4/AS 2576:
1315-B7.
Ferrite Number 15.0
Features:
SHIELDCROME Stainless Steel Flux Cored Wires.
Convenient Self Shielded (Open Arc) Operation For “In situ” or Outdoor Applications.
For Joining Dissimilar Steels or as a Buffer Layer Prior to Hard Surfacing.
High Deposition Rate Downhand Welding.
Typical All Weld Metal Analysis:
C: 0.02% Mn: 1.20% Si: 0.5%
Cr: 24.4% Ni: 12.6%
Typical All Weld Metal Mechanical Properties:
Tensile Strength
610 MPa
Elongation 38%
Actual weld metal mechanical properties achieved with Shieldcrome wires are
influenced by many factors including, base metal analysis, welding parameters / heat
input used, number of weld passes and run placement etc. Please consult your nearest
CIGWELD branch for welding procedure recommendations.
Comparable CIGWELD Products:
Shieldcrome 309LT all positional gas shielded FCAW wire
AWS A5.22:
E309LT1-1 / E309LT1-4.
Shieldcrome 309LTD downhand gas shielded FCAW wire
AWS A5.22:
E309LT0-1 / E309LT0-4.
Autocraft 309LSi GMAW wire
AWS A5.9:
ER309LSi.
Comweld 309L Gas / TIG rod
AWS A5.9:
ER309L.
Satincrome 309Mo-17 electrode
AWS A5.4:
E309Mo-17.
Recommended Shielding Gases:
Not required.
Packaging Data:
Wire Diameter Wire Type Type Pack Weight Pack Part No.
2.4 309LT-O Coil 22kg 11231200
Operating Data:
All welding conditions recommended below are for use with semi-automatic self shielded operation and DC electrode positive.
Wire Diameter (mm) Current Range (amps) Voltage Range (volts) Electrode Stickout E.S.O. (mm) Welding Positions
2.4 300-350 28-30 20-25 Flat
2.4 300-350 28-30 20-25 HV Fillet
These machine settings are a guide only. Actual voltage, welding current and E.S.O. used will depend on machine characteristics, plate thickness, run size, shielding gas and
operator technique etc.
390
Copyright. Produced with the permission of CIGWELD
SPW GROUP PTY LTD