SPW Product Catalogue 2019

PT-26 PLASMARC TM TORCH
PLASMA TORCHES AND SPARES
This versatile, easy-to-use 300A torch provides superior performance
for a full range of manual cutting applications.
1
Cutting speed (inches/min.)
Cutting speed (inches/min.)
PT-26 Aluminium Cutting Data
0.00 0.25 0.60 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00
Material Thickness (inches)
PT-26 Steel Cutting Data
200 amps H-35 Plasma
150 amps H-35 Plasma
200 amps Air Plasma
300 amps Air Plasma
300 amps H-35 Plasma
Plasma Gas: Air at 60psig
Shield Gas: Air at 50psig
Start Gas: H-35 Nitrogen or
Air at 30psig
Stand-off: 5/16
*Applies to ESP-200 only
For H-35 Plasma gas, use
Nitrogen or H-35 start gas.
50 amps
150 amps
200 amps
300 amps
Plasma Gas: Air at 60psig
Shield Gas: Air at 50psig
Start Gas: Air at 40psig
Stand-off: 5/16”
*Applies to ESP-200 only
FEATURES
Excellent cutting capability - cuts up to 90mm and severs 100mm using air,
nitrogen or argon-hydrogen at 300A
Produces clean, high quality cuts
Patent pending safety circuit for enhanced operator safety
Operates with shop or cylinder air, nitrogen or argon- hydrogen at 300A
Long life electrodes lower operating costs
Pilot arc starting - even starts on paint
Gouging nozzle available
Intermittent cutting capacity for grate or expanded metal applications
Gouging guard and stand-off guide available for operator convenience
TECHNICAL DATA PT-26
Current Capacity
200A DCSP at 100% duty cycle
300A DCSP at 60% duty cycle
300A DCSP
Maximum Rated Current
Approved Service Gases
Plasma
Air, N2, H-35, N2/H2 Mixture
Cooling
Air, N2, CO2,Ar
Min. Gas Supply Flow Requirements
Shield
200cfh at 85psig (94 l/min. at 6.0Bar)
Plasma
240cfh at 80psig (112 l/min. at 5.6Bar)
Length of Service Lines
7.6m or 15m
Weight
7.6m - 7.3kg / 15m - 12.7kg
Min. /Max. Inlet Gas Pressure 40psig (2.8 Bar) 100psig (6.9 Bar)
Min. Water Supply Flow
3.4 l/min at 6.6 Bar
Max. Water Inlet Pressure 120psig (8.3 Bar)
Max. Water Temperature 40°C
CONSOLES
ESP-150, ESP-200 and Deuce Pack 150
ORDERING INFORMATION
PT-26, 90° Torch Head, 7.6m 36558
PT-26, 90° Torc Head, 15m 36559
PT-26, in-line, 7.6m 0558 002 320
PT-26, in-line, 15m 0558 002 321
Cutting speed (inches/min.)
0.00 0.25 0.60 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00
Material Thickness (inches)
PT-26 Stainless Steel Cutting Data
200 amps H-35 Plasma
300 amps H-35 Plasma
200 amps Air Plasma
300 amps Air Plasma
Plasma Gas: Air at 60psig or
H-35 at 70psig
Shield Gas: Air at 50psig or
Nitrogen at 40psig
Start Gas: Air at 40psig or
Notrogen or H-35 at 30 psig
Stand-off: 5/16”
*Applies to ESP-200 only
For H-35 Plasma gas, use
Nitrogen or H-35 start gas.
0.00 0.25 0.60 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00
Material Thickness (inches)
Stand-Off Guide
36648
Cutting Nozzle Gouging Nozzle
150A – 36568
200A – 36571
200A – 36569
300A – 36572
300A – 36570
O-Ring
029450
O-Ring
2110706
Baffle Tube
34585
Electrode Holder
34583 includes O-Rings
86W49 (Upper)
948317 (Lower)
Electrode
36565 - Air: Nitrogen, Nitrogen / Hydrogen
36566 - Argon / Hydrogen (H-35)
Std. Heat Shield – 34592
*Close proximity Heat Shield – 37146
Torch Body & Head
90 0 –34599
70 0 – 0558 002 204
in-line – 0558 002 110
includes O-Rings – 2110706(1)
includes O-Rings – 2029450(3)
Switch
18224
Switch Band (Use
with manual torch only)
36647
WELDING EQUIPMENT
1300 WELDER (1300 935 337)
181