SPW Product Catalogue 2019

WIRES FLUX CORED
SHIELD-BRIGHT 308L XTRA
AWS
E308LT1-1/E308LT1-4
5
APPLICATION
Shield-Bright 308L Xtra is designed primarily for
welding types 301, 302, 304, 304L, 308 and 308L
types of steels in the flat and horizontal positions.
May be used for welding types 321 and 347 if service
temperature does not exceed 260°C. Low carbon
content minimizes carbide precipitation. Weld beads are
finely rippled and horizontal fillets have an essentially
flat surface and equal leg length. Both pure CO2 or
mixed gas (75%Argon/25%CO 2
) can be used.
WELDING CURRENT:
DC(+)
SHIELDING GAS:
CO 2
or 75%Ar/ 25%CO 2
CLASSIFICATIONS
AWS A5.22 E308LT0-1/E308LT0-4
EN 12073 T19 9L R C 3
T19 9L R M 3
TYPICAL ALL WELD METAL COMPOSITION
C Mn Si Cr Ni Mo FN
CO 2
0.030 1.3 0.6 19.2 9.6 0.2 9
75%Ar/25%CO 2
0.025 1.5 0.7 20.1 9.6 0.2 11
TYPICAL PROPERTIES OF ALL WELD METAL
As welded As welded
CO 2
75%Ar/25%CO 2
Yield stress 462 MPa 469 MPa
Tensile strength 565 MPa 575 MPa
Elongation 41% 41%
APPROVALS
ABS
E308LT0-1
PACKING DATA
Diameter mm Spool* Type Weight kg
1.2/1.6 24-8 12.5
PART NUMBER
EA252201629 1.2MM
EA252201637 1.6MM
SHIELD-BRIGHT 309MOL
AWS
E309LMoT1-1/E309LMoT1-4
APPLICATION
Shield-Bright 309MoL is an all position flux cored wire
designed by welding type 316 clad steels on the first
pass in cladding steels or for welding dissimilar metals
such as molybdenum containing austentic stainless
steels to carbon steels. Used in paper mills and in power
plants. Carbon content 0.04% maximum.
Shiled-Bright 309LMo is designed primarily for all
position. Both pure CO 2
or mixed gas (75%Argon/
25%CO 2
) can be used.
WELDING CURRENT:
DC(+)
SHIELDING GAS:
CO 2
or 75%Ar/ 25%CO 2
CLASSIFICATIONS
AWS A5.22 E309LMoT1-1/E309LMoT1-4
EN 12073 T23 12 2 L P C 2
T23 12 2 L P M 2
TYPICAL ALL WELD METAL COMPOSITION
C Mn Si Cr Ni Mo FN
CO 2
0.039 0.9 0.6 22.8 13.3 2.6 17
75%Ar/25%CO 2
0.038 1.1 0.7 23.1 12.8 2.7 17
TYPICAL PROPERTIES OF ALL WELD METAL
As welded As welded
CO 2
75%Ar/25%CO 2
Yield stress 524 MPa 527 MPa
Tensile strength 540 MPa 655 MPa
Elongation 33% 33%
APPROVAL
DNV
309MoL
PACKING DATA
Diameter mm Spool* Type Weight kg
1.2/1.6 24-8 12.5
PART NUMBER
EA252200332 1.2MM
EA252200738 1.6MM
SHIELD-BRIGHT 309MOL XTRA
AWS
E309LMoT0-1/E309LMoT0-4
CONSUMABLES
APPLICATION
Designed for welding type 316 clad steels on the first
pass in cladding steels or for welding dissimilar metals
such as molybdenum containing austentic stainless
steels to carbon steels in the flat and horizontal
position. Used in paper mills and in power plants.
Carbon content 0.04% maximum. Weld beads are finely
rippled and horizontal fillets have an essentially flat
surface and equal leg length. Both pure CO 2
or mixed
gas (75%Argon/25%CO 2
) can be used.
WELDING CURRENT:
DC(+)
SHIELDING GAS:
CO 2
or 75%Ar/ 25%CO 2
CLASSIFICATIONS
AWS A5.22 E309LMoT0-1 E309LMoT0-4
EN 12073 T23 12 2 L R C 3
T23 12 2 L R M 3
TYPICAL ALL WELD METAL COMPOSITION
C Mn Si Cr Ni Mo FN
CO 2
0.034 1.6 0.6 22.5 13.4 2.7 20
75%Ar/25%CO 2
0.030 1.7 0.6 22.8 13.5 2.7 23
TYPICAL PROPERTIES ALL WELD METAL
As welded As welded
CO 2
75%Ar/25%CO 2
Yield stress 527 MPa 559 MPa
Tensile strength 662 MPa 704 MPa
Elongation 33% 30%
PACKING DATA
Diameter mm Spool* Type Weight kg
1.2/1.6 24-8 12.5
PART NUMBER
EA252200969 1.2MM
EA252200977 1.6MM
410
SPW GROUP PTY LTD