SPW Product Catalogue 2019

TIG WELDERS
20
3.6
20
3.6
20
3.6
1
WELDSKILL 200AC/DC
Part No. W1006200 (Plant)
The CIGWELD WeldSkill 200AC/DC is a 240 volt, full digital control, AC/DC Lift TIG, HF TIG (GTAW),
20 3.6
Stick (MMAW) inverter power source specifically designed for the budget conscious user. The unit
features High Frequency (HF) start, Lift TIG start, Up/Down Slope, Pulse, 2T/4T Trigger Function and
Gas Purge for AC or DC TIG welding. The CIGWELD WeldSkill 200AC/DC comes as a complete kit
and is ideal for the light fabrication and maintenance of mild steels, stainless steels and aluminium.
SPECIFICATIONS
Input Voltage 240 Volts, +/– 15%
(15A Plug)
Input Frequency 50/60 Hz
Generator requirement 10 kVA
Output range (DC TIG) 5 – 200 amps
Output range (DC Stick) 5 – 170 amps
Rated Output @ 200A @ 20%, 18V
Duty Cycle (DC TIG) (40°C, 10mins)
Rated Output @ 170A @ 15%, 26.8V
Duty Cycle (DC Stick) (40°C, 10mins)
Max OCV
76V DC
Dimensions (HxWxD) 400H x 240W x 475Dmm
Weight (Power Source) 22 kg
FEATURES
Output This power source provides both AC and DC
welding outputs
HF Start Power source is fitted with HF start in both AC
and DC TIG modes
PULSE Power source fitted with pulse welding
capabilities in TIG mode
240 Volt, 15 Amp Supply Lead fitted to power source*
Maximum Electrode Size 4.0mm Power source is
suitable for 2.0mm, 2.5mm, 3.2mm and 4.0mm
electrode sizes
Australian Standards Compliance This power source
complies to the relevant Australian Standard, AS
60974.1-2006*
1 Year Warranty This equipment is manufactured to
stringent CIGWELD quality standards and is backed by
a conditional One Year warranty*
* Refer to operating manual for full details
POWER SOURCE CONTENTS
WeldSkill 200AC/DC Inverter Power Source, Electrode
holder with 4m lead, Work clamp with 4m lead, TIG
torch 4m lead with remote current control, TIG torch
accessories kit, WeldSkill Argon Regulator/Flowmeter,
Shoulder strap, Operating manual
OPTIONAL ACCESSORIES
TIG torch 4m lead with remote current control
W4013602
Foot Control
W4015800
TIG torch accessory kit
BGSAK2
20
3.6
20
3.6
20
3.6
20 3.6
TRANSMIG 400i
Portable Inverters
Part No. 710014 (Power Source)
The TRANSMIG 400i is a 415 volt, full digital control, DC MIG/ Stick/Lift TIG power source. Features
include variable inductance, digital voltmeter and digital ammeter making this 20 the 20 3.6 ultimate 3.6 20 3.6 unit
designed for precision MIG welding of steel and other DC weldable materials. The unit also has an
integrated Voltage Reduction Device (VRD) for improved operator safety.
20
3.6
WELDING EQUIPMENT
SPECIFICATIONS
Processes
Supply Voltage
Current Range
Duty Cycle
Lift TIG (GTAW); Stick
(MMAW); MIG (GMAW)
415 volt, 3 phase, 50/60Hz
5 – 400 amps
TRANSTIG 300ACDC
Recommended Generator 16 kVA for max. welding
current
Power Source Weight 25kg
Power Source Dimensions 210 W x 420 H x 450 D mm
FEATURES
Compliant integrated Voltage Reduction Device
Save/Load (Recall) weld programs
Embedded micro-processor with digital controls
Intelligent heat sensing fan operates on demand
Easy to use digital display and panel control
Exceptional DC welding characteristics
MIG, Lift TIG & MMAW modes
Fully adjustable weld parameters
Intelligent self diagnostic control
2 Year Limited Warranty*
POWER SOURCE CONTENTS
400i power source, 14 pin plug, 2 x 50mm dinse plugs,
operating manual
OPTIONAL ACCESSORIES
VAF-4 wirefeeder 705700
Tweco No.4 MIG gun 717201
Work lead (8m) 705161
Slide control
OTD10/2004
Hand pendant
OTD10/2005
Foot control
OTD10/2007
TIG Torch (4m) 424720401
Torch accessories kit
BGSAK2
Gas hose 700433
Flowmeter/regulator 301526
Lead set (8m) 646325
14 pin plug 7977710
Copyright. Produced with the permission of CIGWELD
66 SPW GROUP PTY LTD