SPW Product Catalogue 2019

WIRES FLUX CORED
COREWELD 111 ULTRA
AWS
E70T-9
It is a high efficiency, low slag type cored wire with a bright surface finish that is specially designed to provide very high deposition rates, high
deposition efficiency approaching that of solid wires, and low fume emission rates. It is optimized for use with 100% CO 2
shielding but mixes of
75-80% Argon/ 20-25% CO 2
can be used. This cored wire is capable of operating with a very wide current range and has the ability to sustain
good arc stability at higher current levels than are typically associated with small diameter cored wires. The weld surface is smooth with virtually
no spatter and a very thin easily removed slag. Fillet welds are flat to slightly convex. A unique advantage of this product is its ability to produce
clean porosity free welds over primer painted surfaces.It has been designed for general purpose use in the flat and horizontal welding positions.
However in ø 1.4mm and less it is capable of producing good welding characteristics in the vertical up and down positions also. It has particular
applications in shipyard welding where high efficiency and versatile operation are most important and is widely used on panel line applications.
It may be used in a variety of other applications including railcar, automotive, heavy equipment, and general structural steel fabrication. It is
recommended in applications where reduction of welding fume and high welding speed is important.
5
WELDING CURRENT:
DC(+)
SHIELDING GAS:
CO 2
, 75%Argon/25% CO 2
and
80% Argon/20% CO 2
mixes
Classificatons
AWS A5.20 E70T-9
EN 758 T46 3 M C 3
T46 3 M M 3
TYPICAL ALL WELD METAL COMPOSITION
Gas C Mn Si Ni P S
CO 2
0.006 1.37 0.59 0.42 0.015 0.017
TYPICAL PROPERTIES OF ALL WELD METAL
As welded
Yield stress 526 MPa
Tensile strength 608 MPa
Elongation 30 %
Charpy V:
Test temperature Impact values
-29°C
44 J
PART NUMBER
35KU122470 1.2MM
35KU162470 1.6MM
APPROVALS
ABS
3SA, 3YSA
LR
3S, 3YS
DNV
IIIYMS
BV
SA3YM
GL
3YS
NK
KAW 53MG(C)
KR
RSW 52G(C)
RINA
3YH10
CCS
PACKING DATA
Diameter mm Spool* Type Weight kg
1.2/1.6 24-7/77-0 15
CORESHIELD 8
AWS
E71T-8Description
Coreshield 8 is a self-shielded flux cored wire exhibiting extremely good arc characteristics and high welder appeal. This results in minimising
the effort by the welder during the welding process. This electrode will provide good toughness and ductility in commonly used welding
procedures.
WELDING CURRENT:
DC(+)
APPLICATION
Coreshield 8 can be used in all positions utilizing
stringer beads or in straight progression. It is intended
for plate assemblies and joints. The 1.6mm diameter is
ideal for achieving high deposition rates with enhanced
operational characteristics in all positions. For allposition
and open root joints with 1.6mm diameter wire
use a WFS of 3-4m/min, for horizontal and flat welding
use a WFS of 4-7m/min.
CLASSIFICATIONS
AWS A5.20 E71T-8
EN 758 T46 3 Y N 1 H10
TYPICAL ALL WELD METAL COMPOSITION
C Mn Si P S V Cu Al
0.17 0.45 0.12 0.010 0.003 0.01 0.01 0.50
TYPICAL PROPERTIES OF ALL WELD METAL
As welded
Yield stress 464 MPa
Tensile strength 566 MPa
Elongation 23.5 %
Charpy V:
Test temperature Impact values
-29ºC
58 J
-40ºC
30 J
APPROVALS
ABS
3SA, 3YSA H10
LR
3S, 3YS H10
DNV
IIIYMS(H10)
BV
S3YM HH
CWB
PACKING DATA
1/16" (1.6mm) 25# (11.3kg) spl, 50# (22.7kg) coil
0.072" (1.8mm) 25# (11.3kg) spl, 50# (22.7kg) coil
PART NUMBER
EA242206357 1.6MM
EA242206365 1.8MM
CONSUMABLES
408
SPW GROUP PTY LTD