SPW Product Catalogue 2019

AUTOMATION
1
WELDING CHUCK
Bigger working load because of low gravitational centre.
Light weight.
Cause less load to motor with the result that is little
possibility of a motor being burnt. It will also ensure
stable turning speed.
A wide range of grippings and allow easy loading
unloading of workpieces.
Special purpose chucks also available for alignment of
pipes and flanges.
Specifications
Model
Clamp Range (mm)
C-65 ø1.5-60
C-125 ø2.5-125
D-200 ø5-200
D-300 ø80-280
D-400 ø120-380
D-500 ø200-500
D-600 ø150-620
DA-600 ø170-610
DA-1000 ø170-1000
TURNING ROLLS
Model Speed KW Work. Wheel dia. Overall Overall Overall Overall Voltage
piece dia Dia x width length Width Height weight
KT3T 2 x 0.25 120-1500 1600 430 560 0.5T
300 x110
KT5T 2 x 0.37 150-2000 1800 430 0.6T
KT10T 2 x 0.37 150-2800 350 x 118 1910 730 580 1.0T
KT20T 2 x 0.75 300-3600 350 x 175 2240 860 1.6T
KT30T 70 – 1200 2 x 0.75 300-3600 2300 950 680 2.0T 380 –
KT40T mm/min 2 x 1.1 300-4000 2450 950 2.4T 415v
425 x 198
KT50T 2 x 1.5 300-4500 2660 - 3100 1100 800 2.9T
KT60T 2 x 1.5 300-5000 2760-3200 3.2T
KT80T 2 x 1.5 800-6000 580 x 280 3100 1300 1070 4.5T
KT100T 2 x 2.2 800-6500 600 x 300 3300 1420 1120 5.3T
Model
Input voltage
Loading capacity
Speed range
Diameter range
Drive motor
Roller type
Drive dimension (inc. control box)
Slave dimension
net weight
NHTR-1000
AC220/110V, 50/60Hz
1,000kgs
80 ~1600mm/min
ø 20 ~ 800mm
DC Motor, 220V/110V, 100W
50mm(W) x ø 200mm
580(L) x 360(B) x 350(H) mm
450(L) x 120(B) x 350(H) mm
Drive: 38kgs, Slave: 16kgs
WELDING EQUIPMENT
202 SPW GROUP PTY LTD