SPW Product Catalogue 2019

TIG TORCHES AND SPARES
TTK TIG-TORCHES
1
TTC torches represent top quality properties
Easy grip of the handle improves weld quality
Ergonomic oval body design and perfect handle
length
High friction surface improves hold
Adjustable finger grips
Easy to handle in all welding positions
Rubber joint allows even sharp bend of the cable
package. Lightweight handle minimises stress on
hand and wrist.
Only minimum force is needed to handle the torch
because both gas and water hoses are made of
flexible, fabric-reinforced material
Neck can be twisted 360 degrees to a suitable
position in respect of the handle
Right neck angles of 90 and 105 degrees depending
on the torch
Handle and hand remain cool
All Kemppi current cables have wide cross-sectional
areas, which prevents the handle from over heating
Minimised heat conduction from neck to handle
Handle material does not conduct heat to welder’s
hand
Torch head can be extended by max. 30 mm by
pulling.
This reduces thermal radiation from arc to the hand.
Temperature of cooling liquid is kept low thanks to
the cable’s special structure (water hose of only 2
meters)
Durable, versatile switch
Suitable for all types of hand grips
Long switch with large friction surface. Pressing
point can be chosen according to torch position
Shock-resistant structure. Operating ”klick” of
membrane switch can be heard.
TECHNICAL DATA
TTK 130 TTK 130F TTK 160 TTK 160S TTK 220 TTK 220S TTK 300W TTK 350W TTK 250WS
Length / Part Numbers 4 m 627063004 627063104 627066004 627066204 627072004 627072304 627080504 627085504 627075704
8 m 627063008 627063108 627066008 627066208 627072008 627072308 627080508 627085508 627075708
16 m 627063016 627063116 627066016 627066216 627072016 627072316 627080516 627085516 627075716
Loading capacity DC-40% ED 130A 130A 160A 160A 220A 220A 300A 350A 250A
DC-100% ED - - - - - - 200A 250A 200A
AC 40% ED 100A 100A 120A 110A 160A 120A 250A 300A 250A
AC 100% ED - - - - - - 140A 200A 140A
Electrode sizes ø 1.0...2.4 1.0...2.4 1.0...2.4 1.0...2.4 1.0...3.2 1.0...3.2 1.0...2.4 1.0...4.0 1.0...4.0
Connection to TIG-unit gas/current R1⁄4 R1⁄4 R1⁄4 R1⁄4 R1⁄4 R1⁄4 - - -
water/current - - - - - - R3/8 R3/8 R3/8
gas - - - - - - R1⁄4 R1⁄4 R1⁄4
TTK SCRATCH-START TIG-TORCHES
The Kemppi TIG torch range includes also three scratch-start TIG torches with shielding
gas valves in the neck:
TTM 15V 4m (V = Valve)
Part Number: 6271432
Loading capacity:150 A / 35% DC-
Can be used in all electrode welding machines
with a small power connector (for example,
Master 1500, Minarc 110, Minarc 140)
TTM 15V BC 4m (BC = Big Connector)
Part Number: 627143201
Loading capacity:150 A / 35% DC-
Like TTM 15V but equipped with a big power
connector.
Can be used in all electrode welding machines
with a big power connector (for example,
Master 2200, Master 2850)
TTC 220GV 4m (GV = Gas Valve)
Part Number: 627022304
Loading capacity:220 A / 40% DC-
The torch is equipped with a big power
connector.
The torch is meant for use with the Master
2500 MLS and Master 3500 MLS machines.
The current is on only when the start switch is
pressed.
The current is regulated from potentiometer in
the handle (RTC 10 is as standard in the handle)
WELDING EQUIPMENT
1300 WELDER (1300 935 337)
87