SPW Product Catalogue 2019

ACCESSORIES
TRI TOOL INC.
1
1” TO 48” SB LATHES 14” TO 60” RBL LATHES
The split-frame SB lathes offer the precision and power to sever and bevel a wide range of pipe The 600 RBL series split frame lathes provide the highest degree of portability for applications
sizes in the most demanding applications. The Model SB series lathes are designed for (Model severing 602 SBCM Shown)
4
4
where lighter weight and easier handling is an important advantage. The RBL clamshells are
and beveling of pipe from 1” through 48” and offer tool modules and accessories for a wide range designed to sever and bevel 7” through 60” in-line tube and pipe. These clamshells feature precise,
of cutting operations from OD Tracking modules to complex, heavy-wall single-point 1 machining. Drive housing lightweight vee-track 1 roller bearings which feature low drag, with lower weight to maximize
The large SB clamshells produce otherwise unattainable levels of accuracy and control, 2 critical Split Line portability. As with the venerable SB series, set-up and operation of the RBL clamshell is simple
to pipe welding operations in heavy industry and power production. Because of the clamshell’s
3 Drive Input and straightforward. The RBL features adjustable bearings and tool 3 slides to ensure long and 3
power and superior stability, it is ideal for new construction, in-place maintenance, component
4 Tripper Assy. dependable Rotating operation. Simultaneous sever and bevel operations are limited only by wall thickness.
replacement, decommissioning and production.
5 Collet With
Parts
the
Dia.
wide range of clamshell sizes and models, Tri Tool Inc. can provide 6 excellent matching of
6 Tool Holder
Features:
equipment to the work being performed.
Main
7 Tool Bit
Frame Dia.
7
5
• Simultaneously sever and bevel thin or • Excellent for working in tight spaces with
Features:
Cut Line
Notes:
heavy-wall pipe
little clearance
A. Please refer to the • Low friction, field adjustable, bearing system • Adjustable OD mounting system
2
operator's manual
• Numerous drive options
• Cold cutting - No flames or Heat and/or Affected technical • Sever and bevel simultaneously
• Cold cutting Mounting - means Side no heat affected zones
specifications.
Cut line Cl.
• Adjustable OD mounting system featuring
Zones
B. Some listed
• Requires low input horsepower
• Modular design to enhance
specifications may
7
Cut Line Cl.
locator pads & jackscrews for additional • Extendable capabilities with additional refer to specific
• Lightweight, easy to setup
interchangeability Opp. Frame of parts
configurations,
stability
machining accessories
pipe schedules or
material types.
• Worm drive tool modules reduce vibration
• Extended reach tool 6modules for deep severs
and extend tool bit life
Rotation
Measurements indicate the basic machine fitted with standard tool modules.
Optional low axial dimension tool modules are available for the 601SBM
and 602.5SBM. Note: Measurements will vary from those indicated when
machinery is configured for different pipe sizes.
Pipe size range is based on ANSI pipe dimensions. Pipe sizes indicated with (*)
indicate tube sizes, not pipe sizes.
Machine weight is the lifting weight of the machine which includes the basic
machine with standard tool modules.
Rotating parts diameter is the dimension across the face of the machine,
including its moving parts (inner ring and standard tool modules) when the
machine is set-up for the maximum pipe size for the specific model. The
rotating parts diameter becomes less when tool modules are positioned
inward to reach smaller pipes.
Nominal cut line is the dimension from the back of the machine to the center
line of the tool bit slot.
(RBL Model Shown)
1 Drive housing
2 Split Line
3 Locator Pad
4 Tripper Assy.
5 Tool Module
6 Tool Holder
7 Tool Bit
Notes:
A. Pneu. Motor (shown) 3.00"
(76.2mm) up to 612SB, 3.5"
(88.9mm) 616SB and larger.
B. Actual rotating diameter may be
less depending on configuration
and pipe size.
1
3
4
2
B.
6
7
5
A.
WELDING EQUIPMENT
Model Pipe Radial Machine Rotating Parts Machine Machine Base Frame Nominal
Size Range Clearance Weight Diameter OD ID Width Cut Line
Inch (mm) Inch (mm) lbs. (kg) Inch (mm) Inch (mm) I nch (mm) Inch (mm) Inch (mm)
601SBM 1/4 (13.7) - 1 (33.4) 2.00 (50.8) 11.5 (5.2) 5.31 (134.9) 5.31 (134.9) 1.44 (36.6) 2.00 (50.8) 3.50 (88.9)
602TSB *1 1/2 (38.1) - *2 (50.8) 1.49 (37.8) 12.0 (5.4) 4.98 (126.5) 4.98 (126.5) 2.10 (53.3) 2.50 (63.5) 4.00 (101.6)
602.5SBM 1 (33.4) - *3 (76.2) 1.94 (49.3) 14.5 (6.6) 6.87 (174.5) 6.87 (174.5) 3.13 (79.5) 2.00 (50.8) 3.50 (88.9)
604SB 2 (60.3) - 4 (114.3) 2.25 (57.2) 29 (13.1) 9.00 (228.6) 9.00 (228.6) 4.75 (120.7) 3.00 (76.2) 4.50 (114.3)
606SB 3 1/2 (101.6) - 6 (168.3) 2.25 (57.2) 37 (16.8) 11.12 (282.4) 11.12 (282.4) 6.87 (174.5) 3.00 (76.2) 4.50 (114.3)
608SB 5 (141.3) - 8 (219.1) 2.25 (57.2) 43 (19.5) 13.12 (333.2) 13.12 (333.2) 8.95 (227.3) 3.00 (76.2) 4.50 (114.3)
610SB 8 (219.1) - 10 (273.1) 2.50 (63.5) 55 (25.0) 15.75 (400.1) 15.75 (400.1) 11.20 (284.5) 3.00 (76.2) 4.50 (114.3)
612SB 10 (273.1) - 12 (323.9) 2.50 (63.5) 62 (28.1) 17.75 (450.9) 17.75 (450.9) 13.20 (335.3) 3.00 (76.2) 4.50 (114.3)
616SB 12 (323.9) - 16 (406.4) 6.55 (166.4) 200 (91) 29.10 (739.1) 24.00 (609.6) 17.00 (431.8) 4.25 (108.0) 6.93 (176.0)
620SB 16 (406.4) - 20 (508.0) 6.63 (168.4) 320 (145) 33.25 (844.6) 29.20 (741.7) 21.20 (538.5) 4.90 (124.5) 7.58 (192.5)
624SB 20 (508.0) - 24 (609.6) 6.70 (170.2) 350 (159) 37.40 (950.0) 33.40 (848.4) 25.40 (645.2) 4.90 (124.5) 7.58 (192.5)
630SB 26 (660.4) - 30 (762.0) 6.75 (171.5) 420 (191) 43.50 (1104.9) 39.50 (1003.3) 31.50 (800.1) 4.90 (124.5) 7.58 (192.5)
636SB 32 (812.8) - 36 (914.4) 7.05 (179.1) 490 (223) 50.10 (1272.5) 46.00 (1168.4) 38.00 (965.2) 4.90 (124.5) 7.58 (192.5)
642SB 38 (965.2) - 42 (1066.8) 7.10 (180.3) 570 (259) 56.20 (1427.5) 52.00 (1320.8) 44.00 (1117.6) 4.90 (124.5) 7.58 (192.5)
648SB 44 (1117.6) - 48 (1219.2) 7.15 (181.6) 820 (372) 62.30 (1582.4) 58.00 (1473.2) 50.00 (1270.0) 5.75 (146.1) 8.43 (214.1)
614RBL *7 (177.8) - 14 (355.6) 8.09 (205.5) 146 (66) 30.00 (762.0) 21.10 (535.9) 15.00 (381.0) 3.31 (84.1) 6.15 (156.2)
616RBL 10 (273.1) - 16 (406.4) 8.13 (206.5) 159 (72) 32.10 (815.3) 23.10 (586.7) 17.00 (431.8) 3.31 (84.1) 6.15 (156.2)
620RBL 14 (355.6) - 20 (508.0) 8.15 (207.0) 184 (83) 36.20 (919.5) 27.10 (688.3) 21.00 (533.4) 3.31 (84.1) 6.15 (156.2)
624RBL 18 (457.2) - 24 (609.6) 8.31 (211.1) 207 (94) 40.55 (1030.0) 31.10 (789.9) 25.00 (635.0) 3.31 (84.1) 6.15 (156.2)
630RBL 24 (609.6) - 30 (762.0) 8.34 (211.8) 239 (108) 46.65 (1184.9) 37.10 (942.3) 31.00 (787.4) 3.31 (84.1) 6.15 (156.2)
636RBL 30 (762.0) - 36 (914.4) 8.38 (212.9) 264 (120) 52.75 (1339.8) 43.10 (1094.7) 37.00 (939.8) 3.31 (84.1) 6.15 (156.2)
648RBL 42 (1066.8) - 48 (1219.2) 9.00 (228.6) 940 (427) 67.50 (1714.5) 60.00 (1524.0) 50.00 (1270.0) 5.13 (130.3) 7.97 (202.4)
660RBL 54 (1371.6) - 60 (1524.0) 9.00 (228.6) 1120 (508) 79.50 (2019.3) 72.00 (1828.8) 62.00 (1574.8) 5.13 (130.3) 7.97 (202.4)
48 SPW GROUP PTY LTD