WARNING - Flannery Plant Hire

Pilot Control Shut-Off Lever
The pilot control shut-off lever is a device to prevent the
machine from being unexpectedly operated even if the
control levers are accidentally moved, such as with a part
of the body or when the operator is getting in or out of the
operator’s station.
Pilot control shut-off lever (1) is linked to console (2) latch
mechanism so that console (2) is raised in the LOCK position
to aid in entering and exiting the operator’s station and for
maintenance.
d WARNING:
• To deactivate control lever and pedal functions,
be sure to pull pilot control shut-off lever (1) and
raise console (2) to the fully locked position. To
reactivate control lever (3) function, always hold
and push pilot control shut-off lever (1) down.
Never attempt to lower raised console (2) or
control levers (3) to reactivate control lever (3)
function without holding pilot control shut-off
lever (1).
• Always stop the engine and pull pilot control
shut-off lever (1) to the full LOCK position before
exiting the operator’s station, even when exiting
temporarily.
OPERATING MACHINE
• Be sure to move the pilot control shut-off lever to
the LOCK position before exiting the machine after
each shift.
Before Leaving the Machine:
1. Park the machine on a firm, level surface. Lower the
bucket and blade to the ground. Return all control levers
to neutral. Stop the engine.
2. To deactivate control lever (3) function, be sure to pull
pilot control shut-off lever (1) and raise console (2) to the
fully locked position.
5-8
Lock Position
1 3
Unlock Position
1
2
M1NC-05-004
M1NC-01-013