WARNING - Flannery Plant Hire

Driving in Water or on Soft Ground
DRIVING MACHINE
1. If the footing is even and the water slow running, the
machine can drive in water up to the upper track shoe
surface (A) at the top of the front idler. In case the
footing is uneven and the water is flowing fast, be careful
not to submerge the swing bearing, swing pinion gears,
and/or center joint in water or mud.
Operable Water Depth (A)
ZX14-3, 16-3, 18-3 370 mm
ZX27-3 465 mm
2. The machine may enter deeper areas gradually. Check
the machine’s position often. Reposition the machine if
necessary.
IMPORTANT: If the swing bearing, swing gears and
center joint are submerged in water or
mud by mistake, premature wearing on
parts such as the swing bearing may result.
Grease must be changed or overhauling
will be required immediately. Stop
operating the machine as soon as possible,
and contact your authorized dealer.
4-6
A
M1NC-04-001