WARNING - Flannery Plant Hire

Engine Oil Pressure Indicator
OPERATOR'S STATION
The red indicator will light when the engine oil pressure is
low. If the red indicator comes ON, the engine oil pressure
warning buzzer will sound at the same time. Immediately
stop the engine. Check the engine oil pressure system and
the oil level for any abnormality.
Hour Meter
Total (accumulated) machine operation hours counted since
the machine started working, are displayed in the unit of
HOUR (h). One digit after the decimal point indicates the
tenths of an hour (6 minutes).
Fuel Gauge (ZX14-3, 16-3, 18-3)
The gauge segment position indicates the fuel level. Refill
the fuel before only the E-marked segment comes ON.
Fuel Gauge (ZX27-3)
The gauge needle position indicates the fuel level.
When the needle reaches the E-point in the white range, the
remaining fuel is approximately 10 liters.
Coolant Temperature Gauge (ZX27-3)
The gauge needle position indicates the engine coolant
temperature. Coolant temperature is normal when the
needle stays in white zone while operating.
Coolant Temperature Indicator
When the key switch is turned to the ON position, the
indicator will light when the engine coolant temperature is
low.
1-7
M178-01-037
M1NC-01-006
M1NC-01-007
M1MW-01-007
M1MW-01-008
M1NC-01-008