WARNING - Flannery Plant Hire

Check Machine After Starting Engine
IMPORTANT: In case any abnormality is found in the
monitor, immediately stop the engine.
Trace the cause of the problem.
Check Using the Monitor
After the engine has started, check the following points
through the monitor.
1. Check that alternator indicator (1) is OFF.
In case alternator indicator (1) stays ON, immediately
stop the engine. Then, check the alternator and/or
battery system for any abnormality.
2. Check that engine oil pressure indicator (2) is OFF.
OPERATING ENGINE
In case engine oil pressure indicator (2) stays ON,
immediately stop the engine. Then, check the engine oil
pressure system and/or the oil level for any abnormality.
Check Engine Noise and Exhaust Gas
Check that engine noise and exhaust gas are normal.
fNOTE: Checking exhaust gas (With no load, after warming up)
Colorless or faint blue normal (complete
combustion)
Black abnormal (incomplete
combustion)
White abnormal (burning oil or
coolant leakage into cylinder)
3-5
2
ZX14-3, 16-3, 18-3
1
M1NC-01-005
ZX27-3 M1NC-01-022
3
4