WARNING - Flannery Plant Hire

Starting Engine
Starting in Ordinary Temperature
1. Check that pilot control shut-off lever (1) is in the LOCK
position.
2. Turn engine control lever (3) to the slow idle position.
3. Sound the horn to alert bystanders.
4. Turn key switch (2) to rotate the starter. The engine will
be started.
OPERATING ENGINE
IMPORTANT: Prevent starter damage and/or battery
over discharge. Never run the starter
for more than 10 or 15 seconds at a time
(ZX14-3, 16-3, 18-3: 15 seconds, ZX27-3 : 10
seconds). If the engine fails to start, return
the key switch to OFF. Wait for more than 30
seconds, then try again.
5. Release key switch (2) immediately after the engine has
started. It will automatically return to the ON position.
fNOTE: The horn sounds even though the key switch is turned
OFF. The engine does not start unless the pilot control
shut-off lever is in the LOCK position.
IMPORTANT: Avoid operating key switch (2) with stained
hands or gloves.
3-2
Slow Idle
3
2
1
Fast Idle
M1NC-05-004
M1NC-00-007
M1M7-01-007