WARNING - Flannery Plant Hire

ZX27-3
1. Check that pilot control shut-off lever (1) is in the LOCK
position.
2. Turn engine control lever (3) to around the middle
between the slow and fast idle positions.
3. Turn the key switch (2) to ON position. The preheat
indicator (4) will light.
4. Sound the horn to alert bystanders.
5. As soon as preheat indicator (4) goes OFF, return key
switch (2) to the START position to run the starter.
OPERATING ENGINE
IMPORTANT: Prevent starter damage and/or battery over
discharge. Never run the starter for more
than 10 seconds at a time. If the engine fails
to start, return the key switch to OFF. Wait
for more than 30 seconds, then try again.
6. Release key switch (2) immediately after the engine has
started. It will automatically return to the ON position.
fNOTE: This machine is equipped with Auto Glow System.
Sensing the coolant temperature, the duration of
preheating is automatically set. Be sure to wait until
the preheat indicator goes off with the key switch
turned to the ON position, as specified above. When
atmospheric temperature is low, it is possible to
operate the starter motor for within 15 seconds at a
time.
3-4
3
2
1
4
M1NC-05-004
M1M7-01-007
M1NC-00-007
M1NC-01-022