WARNING - Flannery Plant Hire

2
3
Bucket and Link Pins
--- every 100 hours
MAINTENANCE
Grease all submerged pins after operating in water.
Blade Pins (ZX27-3)
--- every 500 hours or every year
• Blade connecting pin
• Blade cylinder rod end and bottom
Precautions for Front Attachment and Blade Removal
1. When pins are removed to replace the front attachment
or blade, do not attempt to clean the bore insides of the
bushings.
2. Before installing the front attachment or the blade, apply
grease sufficiently to the pin-boss ends or the dust seals
of the cylinders.
3. Be sure to install at least one shim on both sides of front
joint pins.
4. When the swing post is disassembled, coat the pins and
the thrust plates with grease before reinstalling them.
7-18
M503-07-092
M1LA-07-037