WARNING - Flannery Plant Hire

Engine
TROUBLESHOOTING
Problem Cause Solution
Nothing Works Battery Recharge or replace.
Battery Undercharged Loose or corroded connections Clean and tighten or replace battery.
Alternator belt loose Tighten or install new belt.
Alternator not charging See your authorized dealer.
Fuse Replace fuse.
Key switch failure Replace key switch.
Starting Motor Will Not Turn Battery undercharged or dead Recharge or replace battery.
Battery cables making poor
connections
Clean connections.
Fusible link Replace fusible link.
Key switch See your authorized dealer.
Start relay See your authorized dealer.
Starter solenoid See your authorized dealer.
Starter Repair or replace start motor.
Starter pinion jammed in flywheel
gear
Repair or replace starter.
Major engine failure See your authorized dealer.
Starter Solenoid Chatters Poor connections at battery or
starter
Clean connections.
Low battery charge Recharge or replace battery.
Starter solenoid “hold-in” windings
open
See your authorized dealer.
Starter Motor Turns but Will
Not Crank Engine
Starter pinion gear not engaging See your authorized dealer.
flywheel ring gear
Pinion shift mechanism jammed or See your authorized dealer.
malfunctioning
Pinion gear teeth broken See your authorized dealer.
Flywheel gear teeth broken See your authorized dealer.
Inspect and replace cables.
internally
Battery or starter cable connections Clean and tighten connections.
loose or corroded
Engine Cranks Slowly Battery cables damaged or broken
11-4