The Virtualization Cookbook for SLES 10 SP2 - z/VM - IBM

► A warning screen will appear as shown in Figure 8-1. Click Re-initialize all. This will result
in the mindisks being formatted before Linux is copied to them.
Figure 8-1 Disk initialization screen
► At the screen that sets the host name, the value read from the configuration file should be
correct. Click Next.
► Set the time zone and click Next.
► Set the root password and click Next.
► At the type of installation screen, select Create Custom Layout and click Next. It is very
important the you choose this option as described earlier.
► At the screen to choose Data Storage Devices and Install Target Devices, move all disks
to the Install Target Devices side by selecting each and clicking the right arrow. Click
Next.
► At the Please Select A Device screen, click Create.
► At the Create Storage screen, choose Standard Partition and click Create.
► At the Add Partition screen as shown in Figure 8-2, set the Mount Point to the root file
system (/), deselect all drives except dasdb, and set the Size (MB) to 512. Click OK.
134 The Virtualization Cookbook for RHEL 6