The Virtualization Cookbook for SLES 10 SP2 - z/VM - IBM

==> link * cf1 cf1 mr
==> acc cf1 f
==> copy system config f = confwrks = (oldd rep
► Edit the SYSTEM CONFIG file and modify the five labels (if you installed onto 3390-9s, there
are only three labels, no W01 and W02 volumes are required):
==> x system config f
====> c/610RES/MVD850/*
DMSXCG517I 3 occurrence(s) changed on 3 line(s)
====> top
====> c/610SPL/MVD851/*
DMSXCG517I 1 occurrence(s) changed on 1 line(s)
====> top
====> c/610PAG/MVD852/*
DMSXCG517I 1 occurrence(s) changed on 1 line(s)
====> top
====> c/610W01/MVD853/*
DMSXCG517I 1 occurrence(s) changed on 1 line(s)
====> top
====> c/610W02/MVD854/*
DMSXCG517I 1 occurrence(s) changed on 1 line(s)
► Search for the string cp_owned and you should see the new labels. Be sure they are
correct before saving the file with the FILE subcommand:
====> top
====> /cp_owned
/* CP_Owned Volume Statements */
/**********************************************************************/
CP_Owned Slot 1 MVD850
CP_Owned Slot 2 MVD851
CP_Owned Slot 3 MVD852
CP_Owned Slot 4 MVD853
CP_Owned Slot 5 MVD854
CP_Owned Slot 6 MPD855
...
====> file
► Verify there are no syntax errors:
==> acc 193 g
==> cpsyntax system config f
CONFIGURATION FILE PROCESSING COMPLETE -- NO ERRORS ENCOUNTERED.
► Release and detach the F disk, CPACCESS the A disk and verify with the QUERY CPDISK
command:
==> rel f (det
DASD 0CF1 DETACHED
==> cpacc * cf1 a
CPACCESS request for mode A scheduled.
Ready; T=0.01/0.01 09:19:57
HCPZAC6732I CPACCESS request for MAINT's 0CF1 in mode A completed.
==> q cpdisk
Label Userid Vdev Mode Stat Vol-ID Rdev Type StartLoc EndLoc
MNTCF1 MAINT 0CF1 A R/O 610RES D850 CKD 39 158
MNTCF2 MAINT 0CF2 B R/O 610RES D850 CKD 159 278
MNTCF3 MAINT 0CF3 C R/O 610RES D850 CKD 279 398
You have now changed the labels of the system volumes in the SYSTEM CONFIG file. It is critical
that you proceed as your system is now in a state where it will not IPL cleanly.
66 The Virtualization Cookbook for RHEL 6