The Virtualization Cookbook for SLES 10 SP2 - z/VM - IBM

8.2.11 Verifying the changes
You are now done customizing the master Linux image. When the system comes back up
you should verify the changes that you made.
► SSH back into the cloner and check a few settings.
► Use the df command to display your file systems. Your output may differ:
# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/dasda1 504M 147M 332M 31% /
tmpfs 498M 0 498M 0% /dev/shm
/dev/mapper/system_vg-opt_lv
372M 17M 337M 5% /opt
/dev/mapper/system_vg-tmp_lv
372M 17M 337M 5% /tmp
/dev/mapper/system_vg-usr_lv
1.5G 817M 619M 57% /usr
/dev/mapper/system_vg-var_lv
372M 85M 269M 24% /var
► Confirm that both of your swap spaces are operational:
# swapon -s
Filename Type Size Used Priority
/dev/dasdb1 partition 262132 0 -1
/dev/dasdc1 partition 524276 0 -2
/dev/dasda2 partition 524296 0 -3
► Verify the shutdown settings with the lsshut command:
# lsshut
Trigger Action
========================
Halt vmcmd ("logoff")
Panic stop
Power off vmcmd ("logoff")
Reboot reipl
► You may choose to confirm other settings.
Congratulations! You have now successfully installed the golden image. This image will
normally be shut down or quiesced. You are now ready to clone the golden image to a new
virtual server.
Chapter 8. Installing and configuring the golden image 143