The Virtualization Cookbook for SLES 10 SP2 - z/VM - IBM

* 'CP MONITOR SAMPLE ENABLE STORAGE' */
/* 'CP MONITOR SAMPLE ENABLE USER ALL' */
/* 'CP MONITOR SAMPLE ENABLE I/O ALL' */
/* 'CP MONITOR SAMPLE ENABLE APPLDATA ALL' */
/* 'CP MONITOR EVENT ENABLE STORAGE' */
/* 'CP MONITOR EVENT ENABLE I/O ALL' */
'PERFKIT' /* Invoke the PERFKIT module @FC012BD*/
Exit
After:
...
/*** Once you have PERFKIT enabled and running uncomment the ***/
/*** following comments ***/
'CP MONITOR SAMPLE ENABLE PROCESSOR'
'CP MONITOR SAMPLE ENABLE STORAGE'
'CP MONITOR SAMPLE ENABLE USER ALL'
'CP MONITOR SAMPLE ENABLE I/O ALL'
'CP MONITOR SAMPLE ENABLE NETWORK'
'CP MONITOR SAMPLE ENABLE APPLDATA ALL'
'CP MONITOR EVENT ENABLE STORAGE'
'CP MONITOR EVENT ENABLE I/O ALL'
'PERFKIT' /* Invoke the PERFKIT module @FC012BD*/
Exit
====> file
► Set the PERFSVM virtual machine to be started at z/VM IPL time. Edit the PROFILE EXEC on
AUTOLOG1 so that PERFSVM is automatically started at IPL time. First, logon to AUTOLOG1.
► Before pressing Enter at the VM READ prompt, type acc (noprof so that the PROFILE EXEC
is not run.
LOGON AUTOLOG1
z/VM Version 6 Release 1.0, Service Level 1002 (64-bit),
built on IBM Virtualization Technology
There is no logmsg data
FILES: NO RDR, NO PRT, NO PUN
LOGON AT 14:51:02 EDT THURSDAY 10/07/10
DMSIND2015W Unable to access the Y-disk. Filemode Y (19E) not accessed
z/VM V6.1.0 2010-09-23 11:31
==> acc (noprof
► Add a line so the virtual machine PERFSVM is started at z/VM IPL time:
==> x profile exec
/***************************/
/* Autolog1 Profile Exec */
/***************************/
'cp xautolog tcpip' /* start up TCPIP */
'CP XAUTOLOG VMSERVS'
'CP XAUTOLOG VMSERVU'
'CP XAUTOLOG VMSERVR'
'CP XAUTOLOG DTCVSW1'
'CP XAUTOLOG DTCVSW2'
'cp xautolog perfsvm' /* start Performance Toolkit */
'cp set pf12 ret' /* set the retrieve key */
...
► Save the file and logoff of AUTOLOG1.
Chapter 14. Monitoring and tuning z/VM and Linux 231