The Virtualization Cookbook for SLES 10 SP2 - z/VM - IBM

More documents

Recommendations

Info

► A warning screen will appear as shown in Figure 8-1. Click Re-initialize all. This will result in the mindisks being formatted before Linux is copied to them. Figure 8-1 Disk initialization screen ► At the screen that sets the host name, the value read from the configuration file should be correct. Click Next. ► Set the time zone and click Next. ► Set the root password and click Next. ► At the type of installation screen, select Create Custom Layout and click Next. It is very important the you choose this option as described earlier. ► At the screen to choose Data Storage Devices and Install Target Devices, move all disks to the Install Target Devices side by selecting each and clicking the right arrow. Click Next. ► At the Please Select A Device screen, click Create. ► At the Create Storage screen, choose Standard Partition and click Create. ► At the Add Partition screen as shown in Figure 8-2, set the Mount Point to the root file system (/), deselect all drives except dasdb, and set the Size (MB) to 512. Click OK. 134 The Virtualization Cookbook for RHEL 6
Figure 8-2 Defining the root file system ► At the Create Storage screen, choose Standard Partition and click Create again and create a 512 MB swap space, also on dasdb. ► Again at the Create Storage screen, click partitions with a File System Type of physical volume (LVM) with the remainder of the space in dasdb (minidisk 100) and dasdc (minidisk 101). ► Create partitions with a File System Type of swap with dasdd (virtual disk 300) and dasde (virtual disk 301). When you return to the Please Select A Device screen, you should see what is shown in Figure 8-3: Figure 8-3 Defining file systems for logical volumes and swap spaces Chapter 8. Installing and configuring the golden image 135
Page 1:
z/VM and Linux on IBM System z: The
Page 4 and 5:
4.1.3 Copying a vanilla z/VM system
Page 6 and 7:
8.2.4 Configuring the VNC server .
Page 8 and 9:
14.4 Viewing Linux data in the Perf
Page 10 and 11:
► Chapter 9, “Configuring RHEL
Page 12 and 13:
Sue Baloga, Bill Bitner, Carol Ever
Page 14 and 15:
z/VM 6.1 z/VM 6.1, available in Oct
Page 16 and 17:
► Shared read-only Linux /usr/ fi
Page 18 and 19:
6 The Virtualization Cookbook for R
Page 20 and 21:
- DASD: 27 3390-3s or 9 3390-9s at
Page 22 and 23:
2.2.2 Backup file naming convention
Page 24 and 25:
One rule that can be recommended is
Page 26 and 27:
2.6.2 z/VM DASD used in this book T
Page 28 and 29:
2.7 Blank worksheets Blank copies o
Page 30 and 31:
2.7.3 Linux resources worksheet Use
Page 32 and 33:
Figure 3-1 PuTTY Configuration wind
Page 34 and 35:
9. You may choose a larger screen s
Page 36 and 37:
Click the Download and Use button.
Page 38 and 39:
26 The Virtualization Cookbook for
Page 40 and 41:
4.1 Installing z/VM from DVD or FTP
Page 42 and 43:
Figure 4-2 Choosing two files to be
Page 44 and 45:
► The LPAR that z/VM will be inst
Page 46 and 47:
c. You should see the Disruptive Ta
Page 48 and 49:
► You may need to clear the scree
Page 50 and 51:
Figure 4-11 Load window ► When yo
Page 52 and 53:
==> Press Enter at the VM READ prom
Page 54 and 55:
Figure 4-14 IPWIZARD screen 2 ► A
Page 56 and 57:
One default setting that can be dan
Page 58 and 59:
Pay attention to the output. If you
Page 60 and 61:
==> rename profile tcpip d poksnd61
Page 62 and 63:
You should see that the VSWITCH VSW
Page 64 and 65:
6285-6287 ATTACHED TO MAINT ► Use
Page 66 and 67:
CP_Owned Slot 6 UP6285 CP_Owned Slo
Page 68 and 69:
==> x user direct c ====> bottom ==
Page 70 and 71:
4.7.2 Logging and customizing the n
Page 72 and 73:
4.7.5 Copying files associated with
Page 74 and 75:
4.8.2 Testing the changes To test y
Page 76 and 77:
HCPDIR494I User directory occupies
Page 78 and 79:
==> link * cf1 cf1 mr ==> acc cf1 f
Page 80 and 81:
... ==> link $page$ a03 a03 mr ==>
Page 82 and 83:
Page 84 and 85:
When SERVICE is successfully comple
Page 86 and 87:
5.1.2 Downloading the service files
Page 88 and 89:
==> deterse s8873950 shiprsu1 f = s
Page 90 and 91:
***********************************
Page 92 and 93:
APAR Component Description VM64774
Page 94 and 95:
Figure 5-4 Downloading service for
Page 96 and 97: 5.2.3 Verifying the zEnterprise 196
Page 98 and 99: 5.4.1 Getting service using ShopzSe
Page 100 and 101: Figure 5-7 Getting fixes from Shopz
Page 102 and 103: ► Use the SERVICE ALL command spe
Page 104 and 105: 92 The Virtualization Cookbook for
Page 106 and 107: 6.1 Installing Linux on the PC If y
Page 108 and 109: 6.3.3 Copying the DVD contents Copy
Page 110 and 111: 6.5 Configuring an FTP server for z
Page 112 and 113: 6.5.3 Testing the anonymous FTP ser
Page 114 and 115: ==> copy user direct c = direwrks =
Page 116 and 117: ► Go back to the top of the file
Page 118 and 119: 8016384 bytes sent in 00:01 (6.01 M
Page 120 and 121: LOGON AT 07:41:38 EDT WEDNESDAY 09/
Page 122 and 123: Figure 7-1 Initial screen of instal
Page 124 and 125: Figure 7-4 Splash screen and device
Page 126 and 127: ► On the next screen the host nam
Page 128 and 129: ► On the Add Partition screen, cr
Page 130 and 131: Figure 7-12 Creating a volume group
Page 132 and 133: # mount 9.60.18.240:/nfs/rhel6/dvd1
Page 134 and 135: # chkconfig --list | grep 3:on abrt
Page 136 and 137: ► Edit /etc/init/control-alt-dele
Page 138 and 139: ► View your order with the swapon
Page 142 and 143: MDISK 100 3390 0001 3338 UM63A2 MR
Page 144 and 145: NFS server directory you just set u
Page 148 and 149: ► Click Create and on the resulti
Page 150 and 151: dev/dasda1 on / type ext4 (rw) proc
Page 152 and 153: ► Import the RPM GPG key so that
Page 154 and 155: This allows the cloner to initiate
Page 158 and 159: DASD 63AA FR63AA , DASD 63AB FR63AB
Page 160 and 161: There are many ways to clone Linux
Page 162 and 163: 0.0.0100 active dasda 94:0 ECKD 409
Page 164 and 165: Initializing cgroup subsys cpuset I
Page 166 and 167: 4 If you specified a value for 3 ab
Page 168 and 169: Then the SSH keys are regenerated i
Page 170 and 171: USER $ALLOC$ NOLOG MDISK A01 3390 0
Page 172 and 173: ► Verify that the new user IDs ha
Page 176 and 177: # cd /nfs # mkdir ks # cd ks ► Co
Page 178 and 179: RUNKS=1 cmdline ====> file ► Next
Page 182 and 183: 11.1.2 Testing Apache apr-util-ldap
Page 184 and 185: ► To allow Web traffic through, y
Page 186 and 187: Complete! OpenLDAP should now be in
Page 188 and 189: gidNumber: 10000 homeDirectory: /ho
Page 192 and 193: This change will create an SMB shar
Page 194 and 195: Figure 11-2 Mapping a network drive
Page 196 and 197:
Dependency Installed: apr.s390x 0:1
Page 198 and 199:
Page 200 and 201:
discarded, and later when all is te
Page 202 and 203:
Page 204 and 205:
► Add minidisk statements to defi
Page 206 and 207:
13.2 Adding a logical volume There
Page 208 and 209:
In this example, there are 586 free
Page 210 and 211:
# reboot Broadcast message from roo
Page 212 and 213:
old desc_blocks = 1, new_desc_block
Page 214 and 215:
card_version hardware_version peer_
Page 216 and 217:
# ls access_denied in_recovery stat
Page 218 and 219:
==> #cp vi vmsg 0 1 In single user
Page 220 and 221:
Note: if the rescue image cannot fi
Page 222 and 223:
-/+ buffers/cache: 98 654 Swap: 761
Page 224 and 225:
idle The current idle percentage Th
Page 226 and 227:
200+0 records out 209715200 bytes (
Page 228 and 229:
► Rerun the same scp commands: #
Page 230 and 231:
Figure 13-2 Manual setting of DISPL
Page 232 and 233:
Using embedded SSH It is also possi
Page 234 and 235:
Page 236 and 237:
14.1.1 Using the INDICATE command z
Page 238 and 239:
list. Normal virtual processors in
Page 240 and 241:
► The Program Directory for Perfo
Page 242 and 243:
a. Use the VMLINK command to both l
Page 244 and 245:
14.2.4 Increasing the size of the M
Page 246 and 247:
Figure 14-1 Performance Toolkit log
Page 248 and 249:
Figure 14-3 Performance Toolkit 327
Page 250 and 251:
14.4 Viewing Linux data in the Perf
Page 252 and 253:
A.2 Online resources These Web site
Page 254 and 255:
1. Input mode - the Insert key, i,
Page 256 and 257:
B.2 z/VM REXX EXECs and XEDIT macro
Page 258 and 259:
parse upper var dasds dasd dasds da
Page 260 and 261:
eturn retVal /* from formatOne */ /
Page 262 and 263:
'command c/USER 6VMRSC10 6VMRSC10/U
Page 264 and 265:
B.3 Linux code end /* else */ This
Page 266 and 267:
# If there are still command line a
Page 268 and 269:
cp_cmd LINK $source_id $source_mdis
Page 270 and 271:
3) # user ID does not exist echo "$
Page 272 and 273:
[ $? -ne 0 ] && echo "Error: timed
Page 274 and 275:
shift fi # If no command line optio
Page 276:
show all

The Virtualization Cookbook for SLES 10 SP2 - z/VM - IBM

Create successful ePaper yourself

Delete template?

Save as template?