The Virtualization Cookbook for SLES 10 SP2 - z/VM - IBM

► The LPAR that z/VM will be installed into should still be selected. On the right you should
still see the (CPC) Recovery menu. Double-click the Load from Removable Media or
Server icon :
Important: If you received the z/VM product electronically, you will need to create your
own DVDs. This step is not covered in this book. See the z/VM manual Installation
Instructions for Electronically Delivered IBM z/VM Operating System Deliverable,
GI11-2900, on the Web at:
http://www.vm.ibm.com/install/prodinst.html
If the DVD is not burned correctly you may see the error message:
ACT36201 "An error has occurred while trying to obtain a list of the software that
can be loaded. ...".
Further, this error may have the side effect of locking the DVD drive. The HMC may need
to be rebooted. To prevent this from happening, be sure you create the DVDs correctly.
Use newer copies of DVD-burning software that has an option for the ISO9660 format,
which is recommended.
► On the Load from Removable Media or Server window as shown in Figure 4-4 on
page 32, the radio button Hardware Management Console CD-ROM/DVD should be
selected.
► In the same Load from Removable Media or Server window, fill in File Location with
/cpdvd.This is the directory on the DVD with the z/VM 6.1 installation code. Click OK.
Figure 4-4 Load from Removable Media or Server panel
32 The Virtualization Cookbook for RHEL 6