09.01.2013 Views

FM 3-34.22 - Army Electronic Publications & Forms - U.S. Army

FM 3-34.22 - Army Electronic Publications & Forms - U.S. Army

FM 3-34.22 - Army Electronic Publications & Forms - U.S. Army

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Sustainment Support for Engineer Operations<br />

deploys with half-full vehicle fuel tanks, purged fuelers, and empty fuel cans. Fuel is issued upon BCT<br />

arrival in the theater. Units forecast requirements based on the current or upcoming mission. The forecast is<br />

SOP-dependent, but is usually for the 72-hour period beyond the next day or up to 96 hours. The BSB fuel<br />

and water support platoon transports fuel to FSCs for maneuver battalions or the BSTB support platoon.<br />

Class IV<br />

8-55. Class IV supplies consist of construction materials, including fortification and barrier materials.<br />

These are items for which allowances are not prescribed. The management of Class IV supplies for<br />

survivability is most efficient when there is a shared interest between maneuvers and engineer logisticians.<br />

BCT units deploy with a limited amount of Class IV barrier material, primarily for the protection of unit<br />

perimeters and key positions. This material is considered the unit basic load (UBL), and is usually carried<br />

on tactical vehicles. Replenishment is ordered by company supply sergeants using the PBUSE Program<br />

from the BSB. Supplies are provided from the BCT distribution point and carried forward by sustainment<br />

elements with the next LOGPAC or immediately if necessary. Barrier material may also be requested as<br />

configured loads. The ENCOORD typically coordinates closely with the logistics staff to assist in<br />

managing barrier and construction materials. (See <strong>FM</strong> 3-90.6 for additional information.)<br />

Class V<br />

8-56. Class V supplies consist of all types of ammunition (chemical, radiological, and special weapons;<br />

bombs; explosives; mines; fuses; detonators; pyrotechnics; missiles; rockets; propellants). Class V supplies<br />

are based on a required supply rate (RSR) or controlled supply rate (CSR). RSR is the amount of<br />

ammunition, usually expressed in rounds-per-weapon per day, estimated to be required to sustain<br />

operations, without restriction, for a specific period. The BCT S-3 develops the RSR. CSR is the rate of<br />

ammunition consumption that can be supported (considering availability, facilities, and transportation) for<br />

a given period. The CSR may be less than the RSR. If the RSR exceeds the CSR, the commander<br />

determines who receives the ammunition. A combat load is the unit commander’s designated quantity of<br />

munitions and items authorized to be carried by unit personnel and combat vehicles (turret load). Troopcarried<br />

munitions to accompany troops (TAT) are those issued before departure from the aerial port of<br />

embarkation (APOE). Turret load or combat load munitions are those authorized for transportation in<br />

thick-skinned vehicles for deployment purposes. Generally, BCTs try to keep three combat loads of critical<br />

munitions on hand. Most units do not deploy with their authorized basic load (ABL) of ammunition.<br />

Instead, they are issued their combat load upon arrival in the theater. However, there are times when<br />

selected units deploy with a full combat load of ammunition.<br />

Class VI<br />

8-57. Class VI supplies consist of all personal-demand items (candy, cigarettes, soap, cameras [nonmilitary<br />

sale items]). BCT Soldiers are usually directed to deploy with 30 days of personal comfort items. Health<br />

and comfort packages (HCPs) are also Class VI items. Class VI support is obtained through supply<br />

channels when a post exchange (PX) is not available. Resupply flow is the same as for Class I supplies.<br />

The delivery of HCPs is based on the head count provided for field feeding.<br />

Class VII<br />

8-58. Class VII supplies consist of major end items (launchers, tanks, mobile machine shops, vehicles,<br />

organizational tool sets). Units deploy with all required equipment based on the appropriate MTOE.<br />

Additional equipment may be issued to the unit in theater based on mission requirements. Class VII<br />

replacement is based on losses reported through command channels. Reporting the loss of major end items<br />

permits the commander to remain apprised of the operational status of subordinate commands and to direct<br />

the distribution of items to those units having the most critical need. Replacement Class VII equipment is<br />

delivered to the BSA BCT.<br />

11 February 2009 <strong>FM</strong> 3-<strong>34.22</strong> 8-13

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!