Operating Instructions, complete - W. Gantenbein GmbH

Operating Instructions
BUFALO Rondofix V3.0
• Transport and installation
The BUFALO RONDOFIX may be transported only in its original packing and lifted only by
the points provided. Installation must be performed exclusively by technically qualified
personnel. The relevant installation instructions must be followed strictly.
• Switching-off
The BUFALO RONDOFIX must be switched off completely for all maintenance and
servicing work, to ensure that all parts of it are dead whilst working.
• Removing safety devices
Safety devices may be removed only when the machine is switched off and its power
supply cut off. The safety devices must be properly fitted again before restoring the power
supply.
• Checks after maintenance or servicing
After any installation, maintenance or servicing work all safety circuits (e.g. interlocks) must
be checked to ensure that they function properly. Above all, after electrical installation or
servicing the safety provisions must be tested (e.g. earthing, insulation resistance etc.). The
BUFALO RONDOFIX may be put back into operation only after successful checking.
• Connections to the BUFALO RONDOFIX
Electrical connecting leads must be protected against all kinds of mechanical damage. The
leads must affect neither the security nor the reliability of the machine, nor working on it.
• Organizational measures
These operating instructions must be kept accessible at all times at a place near to the
BUFALO RONDOFIX.
• Specific safety regulations
Local regulations and specific safety regulations applying to industrial equipment must
likewise be observed when operating the BUFALO RONDOFIX.
� 20 Operatings Instructions Edition 22. November 2007
Bufalo Rondofix V3.0