Operating Instructions, complete - W. Gantenbein GmbH
Operating Instructions, complete - W. Gantenbein GmbH
Operating Instructions, complete - W. Gantenbein GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Operating</strong> <strong>Instructions</strong><br />
BUFALO Rondofix V3.0<br />
The display now changes to the following:<br />
Set Date<br />
Year XXXX<br />
Press the "MOD" key, then enter the current year. Confirm the input by pressing<br />
"Enter". The display now changes to the following:<br />
Set Date<br />
Day/Month XX.XX<br />
Enter the current date in the same way. Attention! Separate the day and month with a<br />
point (.).The display now changes to the following:<br />
Set Time<br />
Hour/Minute XX.XX<br />
Enter the current time in the same way. Attention! Separate the hour and minutes with<br />
a point (.). The display now changes to the following:<br />
Week Day X<br />
1=Monday, 7=Sunday<br />
Enter the numeral which corresponds to the current day of the week. The control<br />
system is now able to interpret the following inputs for Saturday and Sunday correctly.<br />
After confirming the input, the display now changes to the following:<br />
Glue Heather ON<br />
Stunde/Minute XX.XX<br />
Geben Sie nun, wie oben beschrieben, die gewünschte Startzeit für die Leimheizung<br />
ein. Achtung! Die Stunde und die Minute sind durch einen (.) Punkt zu trennen. Das<br />
Display wechselt nun zu folgender Anzeige:<br />
Glue Heather OFF<br />
Hour/Minute XX.XX<br />
Enter the desired stop time for glue heating in the same way. Attention! Separate the<br />
hour and minutes with a point (.). The display now changes to the following:<br />
Saturday X<br />
Is Saturday a workday? If yes, then enter 1 (one) here, otherwise enter 0 (zero) and<br />
confirm with "Enter". This allows you to control whether the glue heating should<br />
automatically start on Saturday or not. The display now changes to the following:<br />
Sunday X<br />
Is Sunday a workday? If yes, then enter 1 (one) here, otherwise enter 0 (zero) and<br />
confirm with "Enter". This allows you to control whether the glue heating should<br />
automatically start on Sunday or not. The system set up is now <strong>complete</strong>, and the<br />
display shows the current operational mode.<br />
� 47 <strong>Operating</strong>s <strong>Instructions</strong> Edition 22. November 2007<br />
Bufalo Rondofix V3.0
Change language