Operating Instructions, complete - W. Gantenbein GmbH
Operating Instructions, complete - W. Gantenbein GmbH
Operating Instructions, complete - W. Gantenbein GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Operating</strong> <strong>Instructions</strong><br />
BUFALO Rondofix V3.0<br />
4.3.5. Pressing station<br />
The pressing station serves to press the books or brochures being produced<br />
(pressing-on the covers).<br />
3<br />
2<br />
59 57 55 53 51 49 47 45 43 41 39 37 35 33 31 29 27 25 23 21 19 17 15 13 9<br />
Fig. 12 Pressing station<br />
1. Front pressing plate<br />
2. Rear pressing plate<br />
3. Pressing table<br />
1<br />
7<br />
On the standard BUFALO RONDOFIX the covers are fed in manually and pressed on<br />
from below and the side by a hydraulic press. Pressing time may be varied between<br />
0.5 and 5 seconds by the control system. Thanks to the high pressing force of 100 kg,<br />
covers weighing up to 300 g can be handled without scoring.<br />
To press on a cover, first the lower pressing plate moves up and presses the cover<br />
against the spine. Then the front and rear pressing plates move together, pressing the<br />
cover against the side glue.<br />
� 26 <strong>Operating</strong>s <strong>Instructions</strong> Edition 22. November 2007<br />
Bufalo Rondofix V3.0
Change language