Operating Instructions, complete - W. Gantenbein GmbH

More documents

Recommendations

Info

Operating Instructions BUFALO Rondofix V3.0 9.2. Cleaning the cooler Fig. 34 Cooler The cooler should be cleaned periodically with compressed air, or with a brush if this is not available. � 70 Operatings Instructions Edition 22. November 2007 Bufalo Rondofix V3.0
Operating Instructions BUFALO Rondofix V3.0 9.3. Adjusting limit switches 9.3.1. Right-hand limit switch Fig. 35 Right limit switch (rear) If the stop at the end position of the sensor is not detected (LED does not light), the sensor position must be corrected. 1. Unfasten the sensor a little and shift it 1 to 2 mm towards the middle of the machine till the LED lights. 2. Tighten the sensor secure. 3. The distance from sensor [1] to counterpiece [2] should be 1-2 mm, maximum 2.5 mm. � 71 Operatings Instructions Edition 22. November 2007 Bufalo Rondofix V3.0 1 2
Page 1 and 2:
Operating Instructions BUFALO Rondo
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20: Operating Instructions BUFALO Rondo
Page 69: Operating Instructions BUFALO Rondo
Page 87: Operating Instructions BUFALO Rondo
show all

Operating Instructions, complete - W. Gantenbein GmbH

Create successful ePaper yourself

Delete template?

Save as template?