Operating Instructions, complete - W. Gantenbein GmbH

Operating Instructions
BUFALO Rondofix V3.0
2.1.2. Intended purpose
The BUFALO RONDOFIX is intended for casing-in, i.e. folding or gauzing books
brochures, blocks and other pressed, stacked or bound materials.
Indication
If the machine is used for any other than the purpose defined here without the
written approval of the maker, or if it is operated outside its technical limits (see
Technical Data), the maker will accept no liability for any damage or injury resulting
therefrom.
2.1.3. Responsabilities
• Personnel
It is the operator's responsibility that everyone charged with the operation,
maintenance or servicing of the BUFALO RONDOFIX has read and understood
the relevant parts of these operating instructions.
• Instruction and training
The BUFALO RONDOFIX may be operated, maintained and serviced only by
instructed personnel having the necessary technical qualifications. The operator is
responsible for organizing and holding the necessary instruction courses.
• Security
The BUFALO RONDOFIX is equipped with the necessary interlocks and safety
devices in accordance with international regulations. Nevertheless the machine
may present dangers if the safety precautions set out in Section 3 are not followed.
These precautions and the safety-relevant instructions in the individual sections
must be observed meticulously by the operator and the users. In particular the
machine operator is responsible for the protection of persons and the prevention of
material damage.
� 9 Operatings Instructions Edition 22. November 2007
Bufalo Rondofix V3.0